Dissertation > Excellent graduate degree dissertation topics show

Study on Electric Field Distribution Optimization of Composite Insulator with Series Connection of Glass Insulator

Author: DengZuoZhuo
Tutor: SiMaWenXia
School: Chongqing University
Course: Electrical Engineering
Keywords: composite insulator glass insulator electric field finite element pollution flashover
CLC: TM216
Type: Master's thesis
Year: 2010
Downloads: 141
Quote: 1
Read: Download Dissertation

Abstract


Due to the geometry configure of composite insulator, fitting structure and dielectric properties of silicone rubber material, the two metal electrodes bring high electric field area near the ends of the composite insulator. With the increase of the potential lever and the length of composite insulator, the electric field becomes higher near the ends. High electric field will cause partial discharge on the insulation material and the surface of the metal electrodes, and impacting the operating characteristics of electromagnetic environment and insulating material. So the high electric field is a dangerous enemy to the safe operation of the power systems. Therefore, it is significant to study the new method of improve the electric field and potential distribution.At present, the installation of corona rings is commonly used as the pressure balancing measure for composite insulators. Corona rings have an obvious effect on improving electric field distribution of composite insulator ends, but limited effect on improving overall voltage distribution. However, the installation of corona rings will reduce the dry arcing distance between two poles of composite insulators, and lower the lightning withstand level of transmission lines. And at the same time both at home and abroad there is still no uniform standard for the use of corona rings.Based on the finite element method, taking the combined use of composite insulators and glass insulators as an example, this thesis puts forward a new method to improve the electric field distribution of composite insulators. This thesis esTablelish a three-dimensional electric field calculation model of composite insulators in the transmission line, and then studied the improved situation of surface potential and electric field distribution of composite insulators with glass insulators installed in the high voltage side of composite insulators at different levels of voltage. The results show that by this means, the voltage that the conducting wire side of composite insulators can withstand is lowered; distorted electric field is eliminated; the electric field distribution in the ends of composite insulators improved. Finally, this thesis recommends the number of glass insulators which should be installed in the high voltage side of composite insulators at different levels.According to the test result of 110kV composite insulator carried in the artificial fog chamber, the result shows that the flashover voltage is obviously improved and the voltage gradient is litter changed after series connection glass insulator. This is due to the pressure effect of glass insulator and the flashover arcing is inhibited certainly. 220kV and 500kV composite insulator can take this as a reference. At last, taking the combined use of 110kV composite insulators and glass insulators as an example, creepage distance, windage yaw, lighting withstand level and the affection of iced-covered composite insulator are studied. It offers some help for insulator modification and external insulation design of transmission lines.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  5. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  6. Three-Dimensional Numerical Modelling for the Head and the Electric Field Analysis of DBS,R742.5
  7. Design of Testing Equipment for Electronic Products,TN06
  8. Diffusion flow downstream sheath structure in experimental study,O53
  9. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  10. Theoretical Research on 2-D Field Plates in the SOI Lateral Power Devices,TN386
  11. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  12. Research on the Space Electric Field Around HVAC-HVDC Hybrid Transmission Lines,TM721.3
  13. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  14. A New Technology and Prototype for Construction Safety Nearly High Voltage,TM81
  15. Pipeline circumferential excitation calculation method of magnetic flux leakage,TG115.284
  16. Metal plate surface electromagnetic ultrasonic flaw detection technology research,TG115.284
  17. Thickness of plate electromagnetic ultrasonic detection and data processing technology research,TG115.28
  18. Rubber modified asphalt mixture mechanical properties of,U414
  19. Submarine pipeline and the sea bed soil interaction finite element analysis,P756.2
  20. Capacitance Tomography direct three-dimensional image reconstruction technology research,TP391.41
  21. Magnetic induction tomography forward problem and reconstruction algorithm,TP391.41

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Insulating materials,dielectric,and its products > Insulator and casing
© 2012 www.DissertationTopic.Net  Mobile