Dissertation > Excellent graduate degree dissertation topics show

Eddy current testing station design and simulation analysis

Author: HeJiLi
Tutor: LuCong；WeiXingJu
School: University of Electronic Science and Technology
Course: Software Engineering
Keywords: LOGO pneumatic systems test-bed simulate
CLC: TH878
Type: Master's thesis
Year: 2011
Downloads: 53
Quote: 0
Read: Download Dissertation

Abstract


In this paper, the detection units to detect vehicle wheel hardness mainly because in today’s era of rapid industrial development, testing hardness of the material is very common, such as the detection of hundreds of auto parts on the hardness, testing all parts of the jet hardness, and so on. Testing the hardness of parts is very important, otherwise it will cause difficult to control heat treatment process parameters, product quality and instability have caused the accident, although parts have been asked by the torsion and bending fatigue conditions, and have a good wear resistance, but still will lead to the generation of the accident. Hardness is a material to resist permanent deformation on the machine and anti-destruction capabilities. Test-bed for the design of the core parts of the hardness testing equipment to complete the mechanical design of the core part of the detection device.This paper presents a virtual simulation based on the hardness testing equipment design. After the establishment of test equipment into three-dimensional models and simulation software tool from using it as a rational structure, measurement accuracy and safety analysis model. Aerodynamic simulation model to establish and complete the reasonable control of the device. Will combine theory and analysis, and test equipment through the rational design of key institutions to complete the design. Simulation results show that the hardness testing equipment needs with good detection performance, and to study the theory into practical work.In this paper, the test-bed is very practical and can be extended to many industries, because not only low cost but also easy operation, safety is also high, test parts can be automated to improve the detection, because the test-bed technology combines electrical, hydraulic and pneumatic technology (especially pneumatic technology), machinery manufacturing three-one.

Related Dissertations

  1. Analysis on the Influence of Consumer Perception and the Text Logo of Women’s Fashion Brand,F274
  2. Automatic Test-bed of the Vehicle Heater and Data Management System,U464.13
  3. Design and Implementation of Wireless Mesh Network Testbed Based on Network Cards,TN929.5
  4. Experimental Verification of Underwater Mobile Sensing Network,P229
  5. Car tire surface marking recognition system design and research,TP391.41
  6. Urban dust pollution control management interventions,X513
  7. About Japanese learners ' koと\,H36
  8. Research on Ground of Deformation Simulation Test-bed,TU433
  9. Dynamic Characteristic and Hardware-in-loop Simulation Research for Automobile Electric Power Steering System,U463.4
  10. The Influnce of Art of Calligraphy on Logo Design,J524
  11. Art Features Study on Chinese Logo Design Since 1990s,J524
  12. Exploring the Application of Concrete Graphics in Modern Logo Design,J524
  13. The Legal Protection of General Website,D923.4
  14. Research and Development of Measurement and Control System for Wind Turbine Test-Bed,TM614
  15. Research on Traditional Cultural Connotation and Characteristics of China Automobile Logos,F426.471
  16. Research on Design and Control Method of Flotation Experiment Platform on Ground Simulation,V526
  17. The Finite Element Analysis and Layout Research of Reducer Test Bench Loader,TH132.46
  18. Museum of Cultural Research and Application of Visual Identity Design,J525
  19. A Research on Dynamic Logo Design,J524
  20. Middle-Class Influence on Clothing,J523.5
  21. On the folk paper-cut can be used in modern logo design factors,J528.1

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Material testing machine and test equipment > Nondestructive flaw detector
© 2012 www.DissertationTopic.Net  Mobile