Dissertation > Excellent graduate degree dissertation topics show

Study on the Processing Technique of Epoxy Resin-Based Copper Clad Laminates for High Density Interconnection

Author: LiXue
Tutor: LiangGuoZheng
School: Suzhou University
Course: Materials Engineering
Keywords: HDI CCL Laminating cycles rheology
CLC: TN405
Type: Master's thesis
Year: 2011
Downloads: 162
Quote: 0
Read: Download Dissertation

Abstract


Following the trend to further miniaturization, more functions, more intelligence of electronic and electrical equipments, High Density Interconnection (HDI) technology brings micro Via and fine lines into the manufacturing of Printed Circuits Boards (PCBs), and it will become the major technology for the future generation PCBs. HDI PCBs are usually manufactured by the method of building-up, which uses a double or four-layers key core as the base,and then builded-up conductive and insulating layer as outer layers in turn to ultimately achieve multilayer structure. Currently, FR-4 ultra-thin core of epoxy resin-based Copper Clad Laminates (CCLs) has been the main base material for HDI PCBs. The process of producing HDI PCBs is also a process for moulding boards at high temperature and pressure for many times. With increasing the build-up number, the moulding times increases, and thus the substrate of CCLs should have better heat-resistance and thermal stability.FR-4 type CCLs, which immersing the electronic grade glass fabric in the varnish of flame retardant epoxy resin, one side or both sides covered with copper foil, is one of plate material moulded by hot-press. Dicyandiamide (DICY) is usually used as the latent curing agent for epoxy resin, howevere, with the coming of the Lead-free era and widespread using of HDI technology, the heat resistance and thermal stability of the traditional DICY-Curing system can not meet the requirements for soldering of lead-free and multiple laminating. Therefore, using the phenolic novolac resin (PN) which contains more phenyl and thus higher heat resistance as the curing agent is becoming the mainstream.In this thesis, the mode of laminating cycles is used as a simulation of the process for fabricating HDI PCBs, two typical CCLs based on PN-Curing and DICY-Curing epoxy systems were prepared, respectively, and then the dependence of integrated performance (including electrical and mechanical properties, heat and moisture resistance) on the number of laminating cycles were comparatively studied. By analyzing the influence of the structure and composition of the resin system on the heat stability of cured resins, a conlusion has been drawn that the PN-Curing system consisting in fillers is the suitable system for fabricating high-grade HDI PCBs which meeting the lead-free requirements.To further understand the processing of the PN-Curing (filler) system, the curing behavior and rheological properties of PN-Curing and DICY-Curing epoxy systems were investigated comparatively, the curing kinetics were calculated, and the dynamic rheological models were achived. In addition, the influence of fillers on the rheological properties was also studied, and then the processing parameters for fabricating laminates were optimized.

Related Dissertations

  1. Design of AHB Monitor Based on SHA and AES Algorithms,TP309.7
  2. Research on Robust Control Methods for Networked Control Systems with Delays,O231
  3. Design and Implementation of Computer Control System for 2030 CCL in Cold Rolling Mill of Baosteel,TP311.52
  4. The Entire Process Flow Simulation for the Carbonatemethod to Produce 1, 6-Hexamethylenediisocyanate (HDI) Technology,TQ226.63
  5. Study on High-Temperature Resistance of Drilling Fluids,TE254
  6. Effect of Improvers on Wheat Flour Quality and Processing of Flour Food,TS213.2
  7. The Experimental Research and Macro and Microscopic Mechanism Analysis of Soft Soil Strength and Deformation Characteristics,TU43
  8. Studies on the Surface Adsorption and Microemulsion Phase Behavior of Surfactant-like Lonic Liquids,O647.2
  9. Trimer Modified & High Solid Content Waterborne Polyurethane,TQ630.4
  10. Rice Starch Extraction and Preparation of Resistant Starch,TS231
  11. Moral’s Rheology and Law’s Independence,D90-05
  12. Study on Effect and Mechanism of Dan Xuan Kou Kang on Oral Submucous Fibrosis,R285.5
  13. MRF intrinsic properties of,TB381
  14. A Study on the Macromolecular Association in Gum Arabic Aqueous Solutions,TS201.21
  15. Study on Freeze-drying, Fermentation and Baking Properties of Oat Sour,TS213.2
  16. Taohongsiwutang traumatic fracture on initial clinical observation,R274.9
  17. Morroniside on cerebral ischemia-reperfusion injury in rats and its mechanism,R285
  18. Effect of Hyperbranched Polyesteramide on the Rheological Characteristics of Filled Styrene-butadiene Rubber,TQ330.1
  19. Reinforced polyethylene terephthalate composites , structure and properties of,TB332
  20. Study on the Key Techniques of Large-Capacity Complex Spinning Component,TS152
  21. The Effects of Aerobic Exercise and Dietary Control on Hemorheology in Type 2 Diabetic Rats and Its Mechanism,G804.2

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Microelectronics, integrated circuit (IC) > General issues > Manufacturing process
© 2012 www.DissertationTopic.Net  Mobile