Dissertation > Excellent graduate degree dissertation topics show

Refinement-oriented Geometrical Modeling and Manufacturability Analysis for Surface Micromachined MEMS

Author: LingHao
Tutor: LiJianHua
School: East China University of Science and Technology
Course: Applied Computer Technology
Keywords: CAD MEMS Model refinement Design variation Mask mapping
CLC: TP211.4
Type: Master's thesis
Year: 2012
Downloads: 34
Quote: 0
Read: Download Dissertation

Abstract


With the structure of MEMS devices becoming increasingly complex, MEMS devices must be designed iterately to satisfy their performance requirements. In this mode, not only the process is inefficient, but also the relationships between process models and 3D geometrical model cannot maintain. As a consequence work of direct geometric modeling, this thesis proposes a refinement-oriented variation method and manufacturability analysis method for surface mir-comachined MEMS devices.The thesis is organized as follows:(1) A refinement-oriented modeling framework is proposed for MEMS geometric model. Through this framework not only can refine the MEMS model, but also can map the varation to process model automatically. At last, this framework maintains the relationship between geometrical model and process model.(2) A manufacturability analysis method is proposed to maintain the manufacturability of refined 3D geometric model. Based on the researches of traditional macro manufacturability and micro manufacturability, those manufacturability problems which include beyond border issue^ reducing face issue态generating face issue and invalid problem in the process of downward propagation are analyzed.At last, the corresponding solutions and evaluations to those problems are generated.(3) A systematic method to established association relationship is proposed. Firstly, the relationship among entities of 3D geometric model is established; Secondy, the method will establish the relationship between 3D geometric model and process model. The varation is propagated in 3D model and mapped to process model automatically based on those relationships.Based on the above researches, the implement of protype system is presented and illustrated with some examples such as micromotor, microactuator.

Related Dissertations

  1. Parametric Technology in Apparel Pattern-Making Based on Constraint Graph,TS941.2
  2. The Research and Design of CAD for Cam Based on VB,TH112.2
  3. Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
  4. Study of Micro Electron Mechanical System Performance Based on Temperature Field of Casimir Potential Energy,TH703
  5. Design, Modeling and Fabrication of Micropump Actuated by Laser-induced Shock Wave,TH38
  6. Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
  7. Six -axis micro- accelerometer electrostatic levitation design and system -level simulation,TH824.4
  8. Six -axis micro- accelerometer electrostatic levitation control system,TH824.4
  9. Microchannels cavitation research,TH703
  10. Design and Noise Analysis of Electrostatic Space Accelerometer Based on MEMS Technology,TH824.4
  11. Technology Research and Experiment of MEMS-IMU/Satellite Integrated Navigation,P228.4
  12. CAD/CAPP/CAM Integrated System Development for Key Components in Marine Diesel,U664.121
  13. Optimal Riser Design of Steel Casting Based on Isolated Liquid Region,TG260
  14. Roll Pass Design Base on the Second Development of SolidWorks and the Process Simulation of Roll Bending,TP391.72
  15. The Research of Underground Mine Blasting CAD System,TP391.72
  16. Theoretic Research on Fiber Accelerometer of MEMS,TP212.14
  17. Slightly inclined cantilever vibration and shock loads in Reliability Analysis,TP211.4
  18. Research and Development of Automatic Parting Generation System in Injection Mould Design Based on NX,TP391.72
  19. Technical Research on Open-Stope Mining Method Computer Aided Design,TP391.72
  20. The Research and Implementation of Knowledge-based Associated Technology for Progressive Die Relief Design,TG385
  21. Parametric Configuration Model for of Civil Jet and Integrated Aerodynamic/structural Design of Wings,V211.41

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > General automation components,components > Mechanical and electrical components , parts
© 2012 www.DissertationTopic.Net  Mobile