Dissertation > Excellent graduate degree dissertation topics show

The Experimental Study on CO2 Laser Processing of Glass

Author: ChenZhenWei
Tutor: WangXinBing
School: Huazhong University of Science and Technology
Course: Optical Engineering
Keywords: Soda-lime glass laser processing tunable CO2 laser Q-switch CO2 laser
CLC: TN249
Type: Master's thesis
Year: 2011
Downloads: 98
Quote: 0
Read: Download Dissertation

Abstract


Soda-lime glass, because of the advantages of low price, easy preparation and stability physical and chemical properties, become the most widely used glass material in the industrial and domestic. Meanwhile because today’s electronic products tends to be more lighter and thinner , the trend of the industrial production of soda lime glass as raw material to the touch screen and the display causes higher processing requirements. The mechanized processing is very hard to meet the requirements of processing fine soda-lime glass effectively. More and more people who turn their attention to laser machining manage to use the laser processing the soda-lime glass. In reference to this article on the basis of previous studies, more effective methods of processing glass could be found by changing the laser processing parameters and more in-depth study on laser machining.First, establish an equation of heat conduction conforms to realistic processing conditions, the corresponding heat equation initial conditions and boundary conditions. Simulate temperature distribution on the glass surface in different processing parameters.Followed, carrying out the tunable CO2 laser drilling experiment Specific research method: Let the tunable lasers work in a pulsed manner, by changing the laser wavelength, power, pulse width and other processing parameters, studied the relation between the widths of holes and processing parameters. The results showed that the increase in laser power and pulse width will increase the width of the carter increases. Wavelength changes also can affect the width of the hole.Finally, the Q-switch CO2 laser was used to carry out the cutting experiment of soda-lime glass. The impacts of laser power, scanning speed and scanning direction on the cutting quality is studied. The results showed that the depth of the seam was greatly influenced by cutting speed while the width of seam less affected by processing parameters, and the cutting direction has little influence on the cutting efforts. As the local temperature difference was too large, there were a lot of cracks in the vicinity of the kerf .

Related Dissertations

  1. Study on High Power Nd:YAG Laser Scanning Galvanometer System,TN249
  2. Development of the Distance Detection System on Laser Cutting Head and the Workpiece,TN249
  3. Research of Digital Controlled 3D Laser Processing System,TN249
  4. Industrial Robot Off-Line Programming and Application in Optical Laser Processing Platform,TP242.2
  5. Mechanism of Reactive Crystallization in Fluoramphibole Glass-ceramics,TQ174.1
  6. Study on Optic Biosensors Based on Micron Channels,TP212.3
  7. Study of Processing Technology Based on Laser-Microjet,TN249
  8. Research of FS Laser Processing Simulation Based on OpenGL,TG665
  9. Research on YAG Laser Cutting of Soda-Lime Glass with Controlled Fracture,TQ171.683
  10. Study on Coaxial Monitoring System Based on Laser Micro Processing,TP274.5
  11. The Development and Realization of Femtosecond Laser Micromachining Software System,TN249
  12. Research on Embedded and Intelligent Software System of Laser Processing,TN249
  13. The Analysis of AOE’s Developing Strategy in China,F274
  14. Based on embedded CNC laser cutting engraving control system research and development,TG665
  15. Hot temperature and refractive index sensor made ??fiber Fabry-Perot laser micromachining,TP212.11
  16. Laser direct writing system software design and implementation,TN249
  17. The Research of Laser Machining in High-density PCB,TG665
  18. Basic Research on Hybrid Processing of Electrochemical Jet Machining and Laser Beam Machining,TG662
  19. The CNC System Develop for Laser Processing Based on DMC,TG665
  20. Laser texturing Ti6Al4V wetting and anti- cavitation characteristics,TG665
  21. Performance Parameters Calculation and Optimization Based on MATLAB in the Micro Porous Seals,TH136

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser applications
© 2012 www.DissertationTopic.Net  Mobile