Dissertation > Excellent graduate degree dissertation topics show

Bimetallic Catalyst of Co and Ni for Fischer-Tropsch Synthesis Supported on Alumina

Author: YuHuiJuan
Tutor: YingWeiYong
School: East China University of Science and Technology
Course: Chemical processes
Keywords: Fischer-Tropsch synthesis bimetallic catalyst cobalt nickel coproduction of methane and synthetic oil
CLC: O643.36
Type: Master's thesis
Year: 2012
Downloads: 34
Quote: 0
Read: Download Dissertation

Abstract


The pressure of energy saving and environmental protection makes substitute of crude oil produced by Fischer-Tropsch synthesis very attractive. Interests to synthetic natural gas (SNG) obtained through methanation have grown significantly owing to the soaring need of natural gas. The present work was undertaken to combine the production of synthetic oil and SNG through a type of bimetallic catalyst with Co and Ni. We expected to gain a relatively higher fraction of methane to achieve the coproduction of methane and synthetic oil.TPR profiles suggested that reducing peaks of bimetallic catalysts were found to exhibit a shift to lower temperatures compared with monometallic catalysts. 10Co-10Ni/Al2O3 had a relatively lower reducing temperature at 383℃.10Co-10Ni/Al2O3 possessed the lowest CO2 selectivity and a relatively high C5+ fraction, and it exhibited distinct behaviors in comparison with the physical mixture of 20Co/Al2O3 and 20Ni/Al2O3. Physically mixed catalyst of 20Co/Al2O3 and 20Ni/Al2O3 gave worse F-T activity than equivalent co-impregnated 10Co-10Ni/Al2O3 samples. Catalyst prepared through the dehydrated ethanol exhibited the highest CO conversion.The catalytic performance of 10Co-10Ni/Al2O3 has been studied in operation conditions: reaction temperature 240-260℃, reaction pressure 0.5-2.5MPa and space velocity 600-3000ml·g-1·h-1. Reaction temperature plays an obvious role in product distribution while selectivity towards CH4 would achieve 21.50% at 260℃. The improvement of reaction pressure is propitious to the conversion of CO as well as production of heavy hydrocarbons, which can also decrease the selectivity of light hydrocarbons.

Related Dissertations

  1. Syntheses, Structures and Magnetic Properties of New Octacyanometallate-based Coordination Polymers,O641.4
  2. Study on Supramolecular Effect of Cyclodextrin and Alcohol System,O641.3
  3. Study of Assembled PT-Fe Nano-Catalyst for the Selectivity Hydrogenation,TE624.93
  4. Design of Pilot Experimental Device for Fischer-Tropsch Synthesis at 100t/a Oil,TE665
  5. Development of A New Electrochemical Hydrogen Permeation Probe,O646
  6. The Catalytic Properties of Cobalt Carbonyl Complexes in Carbonylation Synthesis of Malonic Ester,TQ225.242
  7. Fabrication of Nanoporous Nickel-based Composite Film and Their Electrochemical Properties,TB383.2
  8. The Study of the Free Radicals Damage Mechanisms of Nickel Steel Workers,R131
  9. Association between MGMT and BRCA1 Gene Methylation and DNA Damage in Peripheral Blood Lymphocytes among Nickel Workers,R131
  10. Effect of Support Calcination Temperature on Structure and Performance of Al2O3-Supported Nickel Phosphide Catalysts,O643.36
  11. Study on Weldability of Inconel601 and Clamping Fixture of Double P Combustion Tube,TG132.32
  12. The Study on the Controllable Property of the Microstructure of Electroless Nickel-boron Films,TQ153.2
  13. A Density Functional Theory Study of O Adsorption on the Ni(111) and Ni(100) Surfaces,TG111.1
  14. Process and Mechanism of Eucalyptus Pulp Bleaching Catalysed by Cu2+/Co2+,TS745
  15. Atomspheric Corrosion Behavior of Low Carbon Steel Containing Al-Si-Ni,TG142.31
  16. Study on Influence of Cutting Fluid on Cobalt Leaching from Cemented Carbide Tools,TG711
  17. Research on Cutting Properties of Diamond Saw Blades and Falling Dust Design of Cutter,TG717
  18. AZ31 Magnesium Alloy Electroless Ni-P Amorphous Plating and Its Crystallization,TG174.44
  19. Properties of Cu Film and Ti/Cu Film on Polyimide Prepared by Ion Beam Techniques,TG174.4
  20. Research based on the depth -sensitive indentation nickel-base superalloy fatigue micromechanical properties,TG115.57
  21. The Research of the Electrolytic Nickel Board’s Cutting Force and Shear Stress,TG339

CLC: > Mathematical sciences and chemical > Chemistry > Physical Chemistry ( theoretical chemistry ),chemical physics > Chemical kinetics,catalysis > Catalytic > Catalyst
© 2012 www.DissertationTopic.Net  Mobile