Dissertation > Excellent graduate degree dissertation topics show

Synthesis and Properties of Flexible Conductive Materials Based on Fibre Template

Author: HuPeiRan
Tutor: WangHongZhi
School: Donghua University
Course: Materials Science
Keywords: conductive network template method electrospinning flexible electronics
CLC: TB383.1
Type: Master's thesis
Year: 2012
Downloads: 145
Quote: 0
Read: Download Dissertation

Abstract


Recently, intense interest has arisen in flexible conductive materials to meet the technological demands of modern society. Transparent conductive oxide (TCO) and related TCO/organic conductive nanocomposites have become the focus in the field of material science.In this text, a regular ITO conductive network (ICN) was fabricated by a simple "dipping and drying" process using cotton as a template. The flexible composite consisted of a ICN and a poly(dimethyl siloxane) (PDMS) substrate was prepared subsequently. The obtained materials were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM), low-impedance surface impedance instrument, universal tester and UV-vis transmission spectrophotometer. The results indicated that the ICN was composed of numerous 20-30 nm ITO aggregate nanocrystallines with ordered distribution. The composite showed a very high electrical conductivity of-5 S m-1, which was-12 times of magnitude higher than that of other ordinary ITO-based composites. Moreover, it exhibited superior electrical/mechanical performance when bent or twisted compared to other ITO-based composites. The state of ITO aggregation in these samples was responsible for their different properties. The ICN/PDMS composite had an excellent mechanical property which was increased by a factor of-1.7 compared with pure PDMS resin and exhibited relatively high optical transmittance in the visible and ultraviolet regions.ATO nanoparticles were synthesized by the solvothermal route and silanized with silane coupling agents. The ATO conductive network (ACN) was prepared by electrospinning a mixture of modified ATO and polyvinylpyrrolidone (PVP). The flexible composite consisted of a ACN and a PDMS substrate was prepared subsequently. The obtained materials were characterized by XRD, FTIR, FE-SEM, thermogravimetric (TG), low-impedance instrument and UV-vis spectrophotometer. The results indicated that the dispersity and sedimentation stability of the ATO particles were improved after silanization. The ACN/PDMS composite showed a very high electrical conductivity of-2.6 S m-1 and exhibited superior electrical/mechanical performance when bent or twisted. The composite exhibited relatively high optical transmittance in the visible and ultraviolet regions.Also, the ACN were prepared by Sol-Gel method and electrospinning a precursor mixture and the flexible composite consisted of a ACN and a PDMS substrate was prepared subsequently. The obtained materials were characterized by XRD, BET, FE-SEM, TG, low-impedance instrument, optical profiler and UV-vis spectrophotometer. The results indicated that the ACN was composed of numerous 30-50 nm ATO aggregate nanocrystallines with ordered distribution. The ATO particle size was smaller and the electrical property of the composite was superior compared to the ACN prepared by particle electrospinning. The ACN/PDMS composite showed a very high electrical conductivity of-3.4 S m-1 and exhibited superior electrical/mechanical performance when bent or twisted. The composite exhibited relatively high optical transmittance in the visible and ultraviolet regions.The outstanding properties of the flexible conductive materials based on fibre template should make them suitable for many applications including flexible electronics, intelligent textile, new classes of solar cell and so on.

Related Dissertations

  1. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  2. The Preparation and Research of Magnetically Separable TiO2 Photocatalyst Nanofibers,TB383.1
  3. The Study of Preparation and Photocatalytic Activity of TiO2 by Electrospinning,O614.411
  4. Preparation and Characterization of Polymer Micro/Nano Fibers by Laser Melt Electrospinning,TQ340.64
  5. Preraration and Properties of Carbon Nanofibers and Their Composites,TB383.1
  6. Research on Preparation and Properties of Composite Electrospun Tissue Engineering Scaffolds,Q813
  7. Preparation and Electrochemical Performance of LiFePO4/CA Material with 3D Conductive Network Structure,TM912
  8. Organic thin film transistor preparation, characterization and circuit design,TN321.5
  9. Preparation and Property Study of Electrospun PLA/Curcumin Composite Membranes,TQ340.64
  10. Study on the Morphology and PTC Effect of the CB/MWNT Cofilled Polymer-Based Composites,TB332
  11. A Study on Preparation Electrospinning Orientation Nanofibers and Nanofiber Bundles,TQ340.6
  12. Preparation of ITO Quai-1D Nanostructures by Sol-Gel Method Combined with Porous Anodic Aluminum Oxide Template,TB383.1
  13. Fabrication and Characterization of Electrospun Samarium-Doped Titanium Dioxide/Carbon Nanofiber Photocatalyst,TB383.1
  14. The Research on Iron Phosphates Materials as Cathode for Lithium Batteries,TM912
  15. Preparation of Phosphates as Cathode Material for Lithium-Ion Battery by Electrospinning,TM912.9
  16. Preparation and Properties of Solid Oxide Electrolyte for Lithium-Air Batteries,TM911.41
  17. Crystallization Behavior of Electrospun Poly (L-Lactic) Nanofibers,TQ340.6
  18. The Preparation of Core-Shell Fiber and Its Application on Polypropylene Modification,TQ325.14
  19. Preparation and Release Behavior of Drug-Loaded PLGA Fibers,TQ460.1
  20. Electrospinning of Thermo-Responsive PNIPAAm/PAMPS Nanofibers and Their Properties,O631.3
  21. The Oil-Water Interface Synthesis of Nano Zinc Oxide and Its Application on PET Non-Woven Fabric,TB383.1

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile