Dissertation > Excellent graduate degree dissertation topics show

Heat Transfer Analysis and Calculation of the Passive Residual Heat Removel Heat Exchanger in Advanced Pwr Nuclear Power Plant

Author: WangZheng
Tutor: WangXueSheng
School: East China University of Science and Technology
Course: Chemical Process Equipment
Keywords: Passive Residual Heat Removal Heat Exchanger advanced PWR nuclear power plant Element Method VB codes Numerical simulation
CLC: TL353
Type: Master's thesis
Year: 2012
Downloads: 228
Quote: 0
Read: Download Dissertation

Abstract


Passive Residual Heat Removal Heat Exchanger (PRHR HX) is a key safety equipment of advanced PWR nuclear power plant, which provides decay heat removal for postulated LOCA and non-LOCA events. The PRHR HX is a C-tube heat exchanger located in the in-containment refueling water tank (IRWST) above the core promoting natural circulation heat removal between the reactor cooling system and the tank. The PRHR HX will keep the reactor coolant sub cooled and prevent coolant relief from primary circuit.In my research project, the Westinghouse AP1000 PRHR HX have been studied in detail, based on the studies, some of innovative theories on heat transfer have been developed. All these achievements will help to realize our own PRHR HX design technology with independent intellectual property rights. Theoretical calculations and analysis, Numerical simulation studies have been conducted in this project. The work principles, heat transfer performance and its calculation method of the PRHR HX have been studied at length.Firstly, based on the PRHR HX transfer mechanism, the heat transfer modes have been established. The different correlations of heat transfer coefficient under different heat transfer modes have been obtained as well. Secondly, we have put forward the calculation method (Element Method) innovatively and realized it using VB codes. Thirdly, the PRHR HX heat transfer process have been simulated by using FLUENT software, the flow field distributions and temperature field distributions of the water in IRWST have been achieved, and some of their change rules have been analyzed.The achievements of this project could provide theoretical supports for the design of PRHR HX of advanced PWR nuclear power plant. It will push the localization of Westinghouse AP1000 in China greatly, at the same time, improve the CAP 1400 research and development, which is a larger capacity nuclear power plant with independent intellectual property rights of China.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  10. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  11. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  12. Numerical Simulation of Biomass Direct Reburning,TK16
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  17. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  18. Stress distribution law FLAC 3D simulation study,TU452
  19. Optimization of Zhenqing two standard K29 450 to K29 900 paragraph excavation slope stability analysis and reinforcement,U418.52
  20. Research of Deep Excavation Construction Process for Nearby Subway Section Action,TU753
  21. Decision Design and Research on Moving-iron Linear Oscillatory Motor with Two Separated Stators,TM359.4

CLC: > Industrial Technology > Nuclear technology > Engineering of Nuclear Reactors > Reactor components and the design, manufacture > Circuit and its equipment
© 2012 www.DissertationTopic.Net  Mobile