Dissertation > Excellent graduate degree dissertation topics show

Research of Merging Unit Based on FPGA and PowerPC

Author: YueYiShi
Tutor: LiHongBin
School: Huazhong University of Science and Technology
Course: Electrical detection technologies
Keywords: Digital Substation Electronic Instrument Transformer Merging Unit Digital Integration FPGA PowerPC VxWorks
CLC: TM45
Type: Master's thesis
Year: 2011
Downloads: 150
Quote: 0
Read: Download Dissertation

Abstract


With the development of higher voltage and larger capacity of power system, a higher requirement for the reliability and the stability of the grid is put forward by the social economy. Because of the large-scale application of all kinds of new energy power generations, reliable grid connection and intelligent dispatching become the problems needed to be solved. Smart grid with a variety of advanced technology is recognized as the best solution to the above problems. As the measuring equipment in the digital substation, electronic instrument transformers overcome the defect of electromagnetic instrument transformers such as low dynamic range, narrow band and ferroresonance. The electronic instrument transformers have digital output that the conventional electromagnetic instrument transformers do not have, which plays an important part in data sharing in the digital substation and in large scale power grid. Consequently, it’s the basis of the advanced decision support system in the smart grid.This paper illustrates a merging unit based on FPGA and PowerPC technology. It’s characterized by dual-processor FPGA and PowerPC hardware system as the core, which can make full use of the FPGA’s high-speed multi-channel parallel processing and the high stability of the PowerPC and its rich peripheral interfaces. Owing to the air core coil is widely used in power system, a digital integrator with feedback loop is designed. The offsets of DC and disturbance signals can be restrained by the feedback loop. A digital interpolation is designed to realize synchronization in order to achieve the strict synchronization requirements of merging unit. A digital phase-shifting algorithm is designed to adjust the phase differential. A control system based on VxWorks is designed to realize the High stability control.As the digital output module of the combined electromagnetic instrument transformers which are used in 110kV and 220kV power system, the designed merging unit passed the type test in the Electrical Equipment of Power Industry and Testing Center. The test results show that the designed combined electromagnetic instrument transformers meet the accuracy requirements of the 0.2s level in IEC60044-7/8, and the designed merging unit passed the EMC Test.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  5. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  6. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  7. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  8. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  9. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  10. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  11. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  12. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  13. Development of Serial Bus Analyzer Based on Nios,TP274
  14. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  15. Development of Pxibus High Performance Digital I/O Module,TP274
  16. Development of LXI Counter,TP274
  17. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  18. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1
  19. Temperature and pressure explosives temperature field memory test technology,TQ560.7
  20. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  21. Remote FPGA system design and implementation of security upgrades,TP309

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Transformer
© 2012 www.DissertationTopic.Net  Mobile