Dissertation > Excellent graduate degree dissertation topics show

Research on the Em Modeling and Optimization of PCB Through Hole Via

Author: YangCao
Tutor: GuoWei
School: Huazhong University of Science and Technology
Course: Electromagnetic Field and Microwave Technology
Keywords: High-speed PCB design Signal Integrity Through hole via modeling parameters extraction numerical simulation
CLC: TN41
Type: Master's thesis
Year: 2011
Downloads: 129
Quote: 0
Read: Download Dissertation

Abstract


In the high-speed circuit design, signal integrity problems will inevitably arise, the design of transmission path in the system is very important. The transmission paths include transmission lines and through hole vias on high-frequency circuit boards. This paper will focus on the following two problems including transmission line effect and the distributed parameter effect of vias. From the line structure definition, transmission line effect can be understood as the distribution of line parameters on the impact of the online signal. And through-hole effect can be understood as multi-dimensional pore structure of layers of different electrical function board from the location of vias.Firstly,detailed analysis of the physical mechanism of the through-hole design impact of various parameters is given on of the signal integrity theory. The cavity model with coaxial line model equivalent method is taken to extract the capacitance parameters of the through-hole and the results are compared with the theoretical calculation. We introduction four vias modeling methods, and use numerical simulation software HFSS and CST Microwave Studio to establish the full-wave analysis model for model validation and comparison, and get a good result.Through electromagnetic simulation of the signal vias and grounded vias, we get the impact of structural parameters on S parameters. All of the impact of each parameter are considered to optimize the design parameters in the actual circuit. Grounded vias are also proposed to add near the signal vias, which reduce the transmission effectively. And we make a simple microstrip line-through hole-microstrip line structure, and get preliminary results using the network analyzer. By comprehensive study of through-hole electromagnetic model, and the simulation and optimization of the magnetic model, we can improve the signal transmission performance and increase the efficiency of circuit design.This paper focuses on the impact of the high speed PCB EMC and SI issues through vias modeling on these three aspects, including theoretical analysis, simulator modeling and PCB board test. Results show that the optimal design parameters and the added ground vias improve the signal integrity.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Design of High-Speed Data Acqusition Board Based on Signal Integrity Analysis,TP274.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Microelectronics, integrated circuit (IC) > Printed circuit
© 2012 www.DissertationTopic.Net  Mobile