Dissertation > Excellent graduate degree dissertation topics show

Structure Design and Process Integration of Wafer Level Vacuum Packaging for MEMS

Author: TangGanRan
Tutor: AnBing
School: Huazhong University of Science and Technology
Course: Materials Science
Keywords: MEMS wafer level packaging vacuum packaging hermeticity packaging soldering bonding getter
CLC: TN305
Type: Master's thesis
Year: 2011
Downloads: 146
Quote: 1
Read: Download Dissertation

Abstract


Hermeticity packaging is a critical technology in the MEMS fabrication technology. Wafer level packaging is considered to be the most potential method to achieving small size and low-cost of MEMS, expected to replace traditional metal packaging and ceramic packaging as the new generation large-scale packaging style for MEMS.Based on the packaging requirements of a specific MEMS, designed a bond solution to achieve bond between two wafers with electroplating solder layer ring on the wafer. This work researched the wafer-level vacuum packaging MEMS device structure design and process integration of the whole process.Because of the decreasing of cavity volume, wafer level packaging requires lower leakage than traditional metal packaging or ceramic packaging. Reasonable structure design, reliable bonding process and efficient getter technology are the precondition for the wafer level packaging. The author researched the design of bond ring width and metal layer structure, metallization and electroplating process, obtained the reasonable sealing structure. Though the method of acoustic scanning test, the author obtained the suitable process parameter of soldering bond, such as reflow time, the thickness of electroplating solder layer and bond pressure. Getter is a material to absorb gas in the cavity and maintain the vacuum persistently. The method of determining gettering properties are presented, and some pilot study on the Ti film getter are performed.Finally, the solder bonding and getter technology are integrated into two wafer level packaging styles respectively, the Chip-to-Wafer (C2W) and Wafer-to-Wafer (W2W), to implement wafer level vacuum packaging of the MEMS, and the wafer-level vacuum packaging sample were tested, the shear strength and hermeticity of the two kinds of sample are both meet the requirement of MIL STD 883.

Related Dissertations

  1. Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
  2. Silicon pressure sensor design of analog-digital conversion circuit,TP212.1
  3. The Design and Manufacturing of Micro-plasma Source in Micro Mass Spectrometer for Gas Samples,O539
  4. Low driving voltage RF MEMS Capacitive Switch Design and Analysis,TM564
  5. Design, Modeling and Fabrication of Micropump Actuated by Laser-induced Shock Wave,TH38
  6. Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
  7. Structural Design and Fabrication of Radial Permanent Magnet Vibration Generator,TM313
  8. Study of A Multi-Channel Stimulating Microelectrode Array for Visual Prosthesis Based on MEMS Technology,R318.1
  9. Wafer Level Vacuum Packaging of MEMS Device by Solder Sealing,TN305
  10. SHS reaction bonding process research and application,TN405
  11. MEMS-based microfluidic PCR technology system development,TN492
  12. Six -axis micro- accelerometer electrostatic levitation design and system -level simulation,TH824.4
  13. Fabrication of Microscale Ordered-reinforced Composite and Its Mechanical Characterization,TB33
  14. MEMS-based sensor motion capture system development and design,TP212.9
  15. MEMS-based micro- fluxgate sensor technology research,TP212
  16. Design and Research on SPDT RF MEMS Switch,TM564
  17. Study on Preparation and Mechanism of Ba-Li and Zn-Ba-Li Alloys by Electrolysis in Molten Salt,TF826.3
  18. Microfabrication of Spiral Type Microtransformer with Magnetic Core by MEMS Technique,TM405
  19. Application of Non-evaporation Getter in Mini Sputtering Ion Pump,TH38
  20. Design and optimization of SOI technology, MEMS - based inertial acceleration,TH824.4
  21. ΜDMFC oriented composite micro- energy systems power management design,TM911.4

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Semiconductor technology > General issues > The semiconductor device manufacturing process and equipment
© 2012 www.DissertationTopic.Net  Mobile