Dissertation > Excellent graduate degree dissertation topics show

Study of Catalyst and Technology for Hydrogenation of Reformed Raffinate Oil

Author: GuoZhenLian
Tutor: ZhangKongYuan；LiuChenGuang
School: China University of Petroleum
Course: Chemical Engineering and Technology
Keywords: Reformed raffinate oil Hydrogenation saturation Catalyst Preparation method Support modified Competing sorbent Process conditions
CLC: TE624.43
Type: Master's thesis
Year: 2010
Downloads: 75
Quote: 0
Read: Download Dissertation

Abstract


Reformed raffinate oil can be used for ethylene cracking feedstock or 6# solvent oil after hydrogenation of the unsaturated hydrocarbon. Until now, most of the catalysts which were used for hydrogenation of olefins are Ni-Mo catalysts. So far, the catalyst which was applied to low pressure （less than 1MPa） hydrogenation reaction has not been reported. There are two kinds of catalysts used for aromatic hydrogenation, Ni-based catalysts and Pt-based catalysts. Pt-based catalysts gain more and more people’s attention because of their well stability, large space velocity and other advantages. But Pt is scare resource, price is expensive, how to optimize the Pt dispersion to improve the efficiency of the catalyst has become an urgent problem to be solved.A series of Ni-Mo-P/γ-Al2O3 catalysts which were used for reformed raffinate oil hydrogenation to produce ethylene cracking feedstock were prepared by changing the content of active component.The Ni-Mo-P/γ-Al2O3 catalysts were characterized and evaluated to determine the appropriate content of active component. The result showed that: The optimum active components content of MoO3 =20%, NiO =3.8%, P =1.24%.The optimum process conditions of Ni-Mo-P/γ-Al2O3 catalysts used for the reformed raffinate oil hydrogenation to produce ethylene cracker feedstock were determined by investigating the effect of process conditions on the hydrogenation activity of catalysts. The optimum reaction temperature was 240℃, pressure w as 0.5M Pa, hydrogen oil ratio w as 100:1, liquid hourly space velocity was 2.0h-1.A series of Pt catalysts used for the reformed raffinate oil hydrogenation to produce 6# solvent oil were prepared using chloroplatinic acid as precursor of Pt. The support of Pt/Al2O3 catalysts was modified by Ti. The result showed that Ti decreased the acidity of support and promoted the reduction and dispertion of Pt which was beneficial to improve the hydrogenation activity. The optimum support calcination temperature of Pt/Al2O3-TiO2 catalysts was 900℃which was determined by investigation of support calcination temperature.The preparation method of Pt/Al2O3-TiO2 catalysts was investigated. The result showed that, both the calcination temperature of catalysts and the species of competing sorbent added to the impregnating solution had effect on the dispertion of Pt. The optimum preparation method of Pt/Al2O3-TiO2 catalysts which was studied by comparing the hydrogenation activity of catalysts was that the catalyst was calcinated at 35℃0 using hydrochlor ic acid as competing sorbent. Thus Pt on the catalyst presented in thick-shell-type.The optimum process conditions of Pt/Al2O3-TiO2 catalysts for the reformed raffinate oil hydrogenation to produce 6# solvent oil were determined by investigating the effect of process conditions on the hydrogenation activity of catalysts. The optimum reaction temperature was 200℃, pressure w as 3.0M Pa, hydrogen oil ratio w as 200:1, liquid hourly space velocity was 3.0h-1.

Related Dissertations

  1. Study on the Procees for the Preparation of Prohexadione and Its Analogs,TQ452
  2. Study on Using Sepiolite As Supported Catalysts in Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol,O643.32
  3. The Preparation of Polyaniline-Metal Complex and the Study on Its Catalytical Property,O634
  4. Synthesis and Characterization of Monovalent, Divalent Imidazolium Ionic Liquids Containing Hydrocarbons,O621.3
  5. Pt -based catalysts of direct methanol fuel cells,TM911.4
  6. The Study of Anode Catalyst Pd/C for Direct Formic Acid Fuel Cell,O643.36
  7. Study on the Synthesis of the Polypyrrole-Cobalt Oxides and Their Catalytic Behavior for the Electroreduction of H2O2,O643.32
  8. The Basicity of MO/ZrO2 Catalyst and Their Use in the Synthesis of 2-Ethyl-Hexyl Carbonate,O623.662
  9. Application of Charcoal Loaded Catalyst for Treatment of Organic Pollutants,X703
  10. Controllable Synthesis of Carbon Nanotubes Supported Metall Nanocatalysts and the Study on Their Electrocatalysis,O643.36
  11. Synthesis of 1,4-Butynediol from HCHO and C2H2 Over CuO-Bi2O3/MgO-SiO2,TQ223.162
  12. Research on Fuel Gas Production from Catalytic Gasification of Municipal Solid Wastes,X799.3
  13. PtRh / Pt 5 / C Catalyst Preparation, Characterization and Electrocatalytic Oxidation of Ethanol,TM911.4
  14. Epoxidation of olefins with high activity cobalt zeolite catalysts,O643.32
  15. MCM-41 as aryl oxime palladium catalyst and catalytic Suzuki coupling reaction of aryl,O643.36
  16. Nano Pt / SiC Preparation, Characterization and Electrochemical Catalytic Performance,TM911.4
  17. Synthesis of t- butyl alcohol using tert-butylbenzene, the catalyst selection and research,TQ241.1
  18. Synthesis and Responsive Behavior of Amphiphilic Azobenzene Functionalized Block Copolymers,O631.3
  19. Study on Potassium Catalyst Recovery of Coal-Steam Catalytic Gasification,TQ546
  20. Research of Ni-Based Catalysts for Hydrogen Generation from NaBH4 Hydrolysis,O643.36
  21. Catalytic Study of Hydrogen Peroxide Synthesis Directly from H2 and O2,TQ123.6

CLC: > Industrial Technology > Oil and gas industry > Oil, natural gas processing industry > Petroleum refining > The refining process > Catalytic converter > Catalytic Hydrogenation
© 2012 www.DissertationTopic.Net  Mobile