Dissertation > Excellent graduate degree dissertation topics show

Study on Simulation of Small-scale Heat Pump

Author: ZhangKang
Tutor: ShenZhiHe
School: Hefei University of Technology
Course: Heating,Gas Supply, Ventilation and Air Conditioning Engineering
Keywords: heat pumps Steady-state distributed-parameter model simulation
CLC: TB65
Type: Master's thesis
Year: 2010
Downloads: 85
Quote: 0
Read: Download Dissertation

Abstract


Applying computer simulation in air conditioning system is favorable to save experiment expense, shorten the period of product development and reduce the cost. It has become the most important means for studying the system working characteristic and optimizing the components.This paper researches diathermancy and fluidity of refrigerant in the compressor, heat exchanger (condenser and evaporator), and capillary , and Simplifies assumptions the corresponding model. Steady-state distributed-parameter models of condenser, evaporator and capillary, and, lumped parameter model of compressor are established.With the equalization of quality,momentum and energy ,the main sectors of refrigeration equipment models can be coupled solution. Fitting the implicit explicit method is applied to system simulation, set up the thermodynamic properties of refrigerant R22 equations and procedures.Developed heat pump system simulation program by MATLAB,and Simulation was carried out on the system.With the help of the program, the influence of tube structural parameters, fin size and volume of air flowing across condenser and evaporator on the performance of refrigeration system are investigated in a stable operating conditions,then,drawing the changing curves which can provide basis for further research.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Industrial Technology > General industrial technology > Refrigeration Engineering > Refrigeration machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile