Dissertation > Excellent graduate degree dissertation topics show

Dynamical Parameterized Modeling of Fixed Joints in Machine Tools

Author: HuangXiaoLei
Tutor: MaoKuanMin
School: Huazhong University of Science and Technology
Course: Mechanical Design and Theory
Keywords: Two-bolt joint Stiffness impact factor Power function fitting Response Surface Method Parametric models Stiffness matrix assembly
CLC: TP391.72
Type: Master's thesis
Year: 2011
Downloads: 38
Quote: 0
Read: Download Dissertation

Abstract


Modern machine tools are moving in the direction of high speed, high precision and integrated, so the dynamic characteristics of machine tools will directly influence the processing characteristics. A lot of studies have shown that the joints of machine tools have a significant influence on the dynamic behavior of machine tools. Therefore, in order to predict and improve the general system performance of machine tools and make optimized design of machine tools, the research of the dynamic characteristics in machine tools must be studied.So far, the researches of joints modeling and parameter identification have made a lot of achievements, but there are no in-depth on the research of factors influencing the joints dynamical parameters. The author investigate the XHK5140, 7-axis five linkage machine tool and the machine of Beijing mechanical and electrical research institute. A series of models of joints connected with two bolts are designed, which contains major factors (surface roughness, pre-load, size).LMS Test.Lab vibration Test and analysis system is used to do modal experiments. Based on the parameter identification method of theoretical modeling, the dynamic parameters (mainly refers to the dynamic stiffness) of joints are identified. And then, through analysing the stiffness matrixes of joints in various working conditions, the article presents the power function model between the dynamic stiffness and preload, and verifies the model. Through the orthogonal experiment, the article analyses various factors influencing the dynamic stiffness of joints. Through comprehensive experiments, based on the response surface method (RSM), the surface parameterization statistical model of joints is put forward, and then the article designs the parametric database management GUI software of joints. In the end, through experiments on the specimen of single joint elment and multiple joint elements, through DMIG cards and parametric statistical model, the stiffness matrixes which are calculated are put into MSC. FEA, and the dynamic parametric modelof joints is verified. Through a lot of experiments, the dynamic parametric model is put forward and verified. Based on the model, dynamic stiffness of joints in varies working conditions can be calculated. The dynamic characteristics of joints connected with bolts in machine tools can be simulated, so that the cost of experiments can be saved.

Related Dissertations

  1. Lipase-catalyzed Transesterification of Lard to Produce L-ascorbyl Fatty Acid Esters,TS221
  2. Recovery Sulphur from Zinc Concentrate of Pressure Acid Leaching Residue,X751
  3. Research on Virginiamycin Fermentation Medium and Process Optimization,S816
  4. Deep manned submersible pressure hull fatigue reliability analysis of titanium,U661.4
  5. The Research on Enriched Selenium Pear Vinegar,TS264.22
  6. Study on Inulinase Overproduction and Ethanol Fermentation by a Mutant of Marine Yeast Pichia Guilliermondii,TQ925
  7. Research on Classified Validation of Complex Structure Model,TB115
  8. Biodiesel Preparation Catalyzed by Immobilized Burkholderia Cepacia Lipase,TE667
  9. Study on Extraction and Purification Process of Rape Phospholipids,TQ645.96
  10. Research on the Key Technologies of Highway Bridge Risk Assessment,U445.1
  11. Improvement of Doramectin Producing Strain by Genome Shuffling,Q933
  12. Reliability Analysis of the Sunken Cave Dwelling Structure Based on Response Surface Method,TU311.2
  13. Study on the Production Process of Jujube Vinegar,TS275
  14. Research Method of System Reliability for Long-span Rigid form Bridge,U441
  15. Venturi tube simulation and optimization of experimental study,O427.4
  16. Fuzzy-Random Reliability Based Optimum of Tower Crane Structure System,TH213.3
  17. Preparation and Surface Modification of Nano-liposome Loading BSA,Q51
  18. Analysis of Collision Responses of the Retractable Roof Structures,TU311.3
  19. Optimization Study on Aerodynamic Add-on Devices of the Container Semi-Trailer Truck,U461.1
  20. Improved multi-objective robust design -oriented product quality optimization,F273.2

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Machine-assisted technology > Machine -aided design (CAD), aided drawing
© 2012 www.DissertationTopic.Net  Mobile