Dissertation > Excellent graduate degree dissertation topics show

The Study on Properties of Desulfurization and Denitrification by Mn/Al Catalysts

Author: XieTian
Tutor: XiangJun；HuSong
School: Huazhong University of Science and Technology
Course: Thermal Power Engineering
Keywords: Sol-gel method Catalyst SCR Simultaneous removal of SO2 and NO DRIFTS
CLC: X773
Type: Master's thesis
Year: 2011
Downloads: 22
Quote: 0
Read: Download Dissertation

Abstract


The main electric source in China is electricity generation by thermal power, which relies mainly on coal combustion. However, the environmental problems made by coal combustion have restricted our national economy and social sustainable development. The regenerative metal oxide processes is a promising technology for simultaneous removal of SO2 and NOx from flue gas, which generates no wastes, reduces energy consumption, and the by-products decreasing the costs.MnOx/γ-Al2O3 catalyst-sorbents were prepared by sol-gel process. CeO2 were added as promoter to improve its low temperature selective catalytic reduction （SCR） characteristics, The denitrification efficiency of the catalysts was measured in a fixed-bed reactor. To obtain more information about the adsorption behaviors of NH3 and NO in this system, oxidation and desorption experiments had been carried out. And then, NH3/O2 and NO/O2 adsorption processes on the MnOx-CeO2/γ-Al2O3 catalyst and the transient response of NH3 and NO were investigated by in situ diffuse reflectance infrared transform spectroscopy （DRIFTS） to study the SCR mechanism. Eventually, large quantities of CuFeMn/Al catalyst-sorbents were prepared by improved impregnation. Performance of the catalyst-sorbents for the simultaneous removal of SO2 and NOx was explored in a co-generation plant.The main and important results of this paper are described as follows: the sol-gel-derived sorbents have typically good structural characteristics and higher denitrification activity. MnOx-CeO2/γ-Al2O3 catalysts maintained at more than 85% NO conversion efficiency at low temperature range （80-150℃） because of its stronger oxidation of NH3. It was found that the SCR reaction on the MnOx-CeO2/γ-Al2O3 catalysts occured between adsorbed NH3 on Lewis acid site and gasous NO, and the NH4+ adsorbed on Br?nsted acid site did not participate in the SCR reaction. It accords with the Eley-Rideal mechanism. The adsorbed NO was oxidized to nitrate and nitrite species, only nitrite and bridge nitrate took part in the SCR reaction. In the actual flue gas of thermal power plant condition, the CuFeMn/Al catalyst-sorbents prepared by improved impregnation showed excellent performance of simultaneous removal of SO2 and NOx. It was due to the solid solutions formed between active ingredient and carrier, which made active ingredient dispersed better in these catalysts. And sulfuration also promoted the NO conversion efficiency. Furthermore, improved impregnation method is relatively simple and can be brought into industrial applications soon.

Related Dissertations

  1. Study on the Synthesis Bi3.25La0.75Ti3O12（BLT） Nanotubes and Nano Wires,TB383.1
  2. Research on Synchronous Motor Excitation Control System,TM341
  3. Study on the Procees for the Preparation of Prohexadione and Its Analogs,TQ452
  4. Study on Using Sepiolite As Supported Catalysts in Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol,O643.32
  5. The Preparation of Polyaniline-Metal Complex and the Study on Its Catalytical Property,O634
  6. Synthesis and Characterization of Monovalent, Divalent Imidazolium Ionic Liquids Containing Hydrocarbons,O621.3
  7. Pt -based catalysts of direct methanol fuel cells,TM911.4
  8. The Study of Anode Catalyst Pd/C for Direct Formic Acid Fuel Cell,O643.36
  9. Study on the Synthesis of the Polypyrrole-Cobalt Oxides and Their Catalytic Behavior for the Electroreduction of H2O2,O643.32
  10. The Basicity of MO/ZrO2 Catalyst and Their Use in the Synthesis of 2-Ethyl-Hexyl Carbonate,O623.662
  11. Preparation and Performance of V2O5-WO3/MOx/Cordierite Catalyst Modified with Cu、Mn、Ce for DeNOx,X701
  12. Application of Charcoal Loaded Catalyst for Treatment of Organic Pollutants,X703
  13. Controllable Synthesis of Carbon Nanotubes Supported Metall Nanocatalysts and the Study on Their Electrocatalysis,O643.36
  14. Synthesis of 1,4-Butynediol from HCHO and C2H2 Over CuO-Bi2O3/MgO-SiO2,TQ223.162
  15. Research on Fuel Gas Production from Catalytic Gasification of Municipal Solid Wastes,X799.3
  16. Cobalt Ferrite and Its Performance,O611.4
  17. MCM-41 as aryl oxime palladium catalyst and catalytic Suzuki coupling reaction of aryl,O643.36
  18. Synthesis and Responsive Behavior of Amphiphilic Azobenzene Functionalized Block Copolymers,O631.3
  19. Catalytic Study of Hydrogen Peroxide Synthesis Directly from H2 and O2,TQ123.6
  20. The Synthesis and Purification of Methyl Glycolate,TQ225.24
  21. Study on Improving Process of Polyphenylene Sulifide Production,TQ326.5

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > Power of industrial waste treatment and comprehensive utilization > Electric Power Industry
© 2012 www.DissertationTopic.Net  Mobile