Dissertation > Excellent graduate degree dissertation topics show

Research and Implementation of Car Light Control System Based on CAN Bus

Author: CaoLiPing
Tutor: QiYuLin；ZhangHuaSheng
School: North China Electric Power University (Hebei)
Course: Electronics and Communication Engineering
Keywords: CAN bus C8051F040 Light control
CLC: TP273
Type: Master's thesis
Year: 2010
Downloads: 245
Quote: 0
Read: Download Dissertation

Abstract


In recent years, with the increasing complexity of of interior automotive electronic control system , the data communication between the electronic control system is becoming increasingly important automotive network technology came into being . CAN (Controller Area Network) bus is a serial LAN bus , serial communications can effectively support distributed real-time control . This article studies the CAN bus network protocols and its technical specifications , the CAN specification CAN2.0B based on completed the formulation of the light control system application layer protocol . Automobile headlights and the vehicle lights control system is divided into the control module , left front module module of the left rear , right front module , right rear module and interior lighting module . \Chip used in the hardware design part , and carried out a detailed analysis of each functional circuit gives the detailed design of the circuit . The lights control system software design thinking , given the the CAN node program design , control module as well as sub- module program analysis and program flowchart . Finally, the lights on the control platform erected by the laboratory tests , the tests show that the control effect is good .

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  7. Research on High-Performance Computer I/O Bus,TP336
  8. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  9. Development of the Digitizer Based on PCI-E Bus,TP274.2
  10. Design of LXI 1553B Bus Communication Module,TP273
  11. Design of the Main Controller in Automotive Body Network Control System,TP273
  12. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  13. Effects of Light Control on Tissue Culture and Photosynthesis Characterristics of Anthurium Andraeanum Lind,S682.14
  14. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  15. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  16. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  17. The Design and Implementation of Medical Treatment Calling System Based on CAN Bus,TN99
  18. Research and Design of HART Communication Module Yston SUPMAX800D Sem,TP273.5
  19. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  20. Research and Design of a Real-Time Clock Chip with Programming,TN402
  21. VME -bus based high-speed trains TCN Gateway Design,TN915.852

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile