Dissertation > Excellent graduate degree dissertation topics show

Fast Charging Station Designed for Electric Bicycles

Author: YangYaBei
Tutor: YingJianHua
School: Huazhong University of Science and Technology
Course: Microelectronics and Solid State Electronics
Keywords: Electric bicycle Fast charging station Auto polarity recognition PI controller
CLC: TM910.6
Type: Master's thesis
Year: 2010
Downloads: 83
Quote: 0
Read: Download Dissertation

Abstract


Electric bicycles are always using up all the electric energies on the halfway, In order to solve this problem, we designed a coin-operated unmanned electric vehicle fast charging stations. According to the experimental results, if the batteries are charged for ten minutes, the bicycles can travel five to ten kilometers, This charging station solved the electric car electricity embarrassing problem, it can have a large number of applications in the right street.The paper researched the principles of fast charging for lead-acid batteries in detail, we minimized the polarization effect of the battery in the case of charging speed guaranteed, the use of high current fast charging method for electric vehicle battery charging, normal charging time for 10 minutes, the total charge time is limited for 30 minutes, to ensure the safety of batteries. According to the battery voltage to adjust the charge current and the maximum charge voltage, according to the polarity of the battery charging power supply automatically adjusts the output polarity, to ensure that the charging station can charge for any electric bicycles. Through voice and LED display to ensure the use easily.The charging station power supply is fly-back topology, the output voltage range is DC24V-80V, the max power is 500W, design the switching transformer and the transformer primary absorption network in detail; Use the fixed frequency current-mode PWM controller to control the switching, use the op amp to achieve PI controller for the voltage loop and current loop feedback regulation , linear opto-coupler PC817 isolates feedback signals; Dual MCU architecture, two hardware systems are power hardware board and human-computer interaction board, they exchange the information through the UART. Low-cost controller with STM8 series MCU, the main role in power system is that it can sample supply voltage, current and temperature signals, to achieve protection of special conditions and charge process control, human-computer interaction system is used to display voltage and current information and playback voice.

Related Dissertations

  1. Design and Implementation of Digital Signal Detection System for RFOG,V241.5
  2. Design and Fem Analysis of Mg Framework of Electric Bicycle,U484
  3. Research on Tuning Method of PI Controller Based on Fuzzy Inference,TP273.4
  4. Modeling, Simulation and Control Strategy of the Doubly-fed Wind-power Generator System,TM614
  5. The Design and Implementation of Electric Vehicle Drive Based on Permanent Magnet Brushless DC Motor,TM571
  6. Research on Direct Drive Wind Power Variable Speed Constant Frequency System,TM614
  7. Research on Development Strategy of Santroll Electric Bicycle Controller Business,F426.4
  8. Electric Bicycle’s Development and Mangement of Ethical Considerations,B82-053
  9. The Research in First Order Velocity Servo System Based on the Fractional Order Controller,TP13
  10. Design of Wheel Motor and Research on Its Characteristics for Electric Bicycle,U484
  11. Research on Solar Charging Device of Electric Bicycles,TM910.6
  12. Electric Bicycle AC Servo Controler Developed,U484
  13. The Ergonomic Analysis Research of Electric Bicycle,U484
  14. A Study of Full-digital and High Performance Brushless DC Motor Control Systerm,TM33
  15. Low voltage high current state of Switched Reluctance Motor Drive System,TM352
  16. The Research of Brushless DC Motor Control System of Electric Bicycle,TM33
  17. Design of Electric Bicycle Controller Based on TMS320F28035,U484
  18. Research on Structural Topology Optimization of Electric Bicycle Frame,U484
  19. Research of the Braking Procedure Simulation of Electric Bicycle,U484
  20. Study on Competitive Advantage of E-bicycles in China Based on Customer Value,F426.47;F224

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > General issues > Charging method,charging equipment
© 2012 www.DissertationTopic.Net  Mobile