Dissertation > Excellent graduate degree dissertation topics show

High -power millimeter-wave antenna duplexer research

Author: JiangHao
Tutor: LiJiaZuo
School: University of Electronic Science and Technology
Course: Electronic Science and Technology
Keywords: high power microwave antenna duplexer metal grating mode-matching
CLC: TN631.2
Type: Master's thesis
Year: 2010
Downloads: 136
Quote: 0
Read: Download Dissertation

Abstract


High-power microwave systems generally refers to peak power of more than 100MW, the frequency between 300MHz ~ 300GHz, the wavelength span in the millimeter to centimeter-wave electromagnetic waves between the generation, transmission, and launch systems.The application in military and industry promotes the high-power microwave research has made rapid development. In recent years, microwave system shown to high-frequency, high-power direction of the trend.As the millimeter-wave system power is usually high, the traditional method to achieve duplex in the microwave transmission lines is no longer applicable, must be applied to high-power millimeter wave antenna duplexer, the internal antenna to achieve duplex.Flame tube, circulator, switch duplexer can be realized, but not used in high power millimeter wave systems, more appropriate method is to apply metal grating duplexer, the advantage of the power capacity limits can be overcome. This paper is a kind of metal grating high-power millimeter-wave antenna duplexer, the core device is a polarizer and a polarization splitter. Firstly, in order to free space Floquet-mode theory and the planar waveguide transmission theory, deduced the structure of single-stage reflection S parameter matrix, prepared by the corresponding numerical calculation program. Using this program, high-frequency characteristics of metal grating structure analysis and verification, and then get the Ka-band rectangular grating polarizer and the polarization separator preliminary design.On this basis, using the cascade pattern matching method and the ladder approximation combined analysis of arbitrary cross section of the preparation of a periodic grating reflective common procedures, the period of grating groove width, depth and angle of incidence on the polarizer the TE wave and TM wave phase and polarization separator -1 order diffraction beam reflection coefficient were obtained. The conclusion that the parabolic metal grating polarizer axis ratio <1.1, the bandwidth of> 10%, parabolic splitter TE wave -1 order diffraction beam with parameter amplitude greater than 85%.According to the parameters obtained by electromagnetic simulation software with the simulation results better match the numerical results prove the correctness of the numerical calculation. Duplexer is optimized for power has a high capacity and bandwidth upgrade.

Related Dissertations

  1. Ku-band high power microwave NiZn ferrite material properties and simulation applications,TM277
  2. Theory Research of Metal Slab and Metal Grating,O436.1
  3. Research frequency antenna,TN822
  4. Metal grating polarizer Design and Process Simulation,TN253
  5. Dielectric film study of the optical characteristics of the periodic structure of metal surfaces,O482.3
  6. Research on the Surface Plasmon Enhanced Efficiency of LED by Coupling with a Metallic Grating,TN312.8
  7. Focusing system based on metal grating Development,TH743
  8. THz band metal grating filter and the equivalent surface plasmon theory,TN713
  9. Electromagnetic Theory of Surface-enhanced Raman Scattering,O431.1
  10. Navigation system for bionic micro-nano research polarizer,TH703
  11. Reflective photoelectric angle encoder,TN762
  12. Study on the Response of p-n Jumction for High Power Microwave Illumination,TN312.4
  13. Numerical Simulations of Coaxial Bragg Structures with Tapered Ripples,TN61
  14. Axisymmetric mode Ka-band antenna design and simulation,TN821
  15. The Research on Simulation Method for the Systemic HPM Effect,TN015
  16. Effects of High Power Microwave Radiation on the Reproductive System of the Rat,R361
  17. Investigations into the Electromagnetic Model for a Complex Frequency-doubling Cavity,TN771
  18. Fiber Bragg Grating Demodulation System Based on Matched Filtering,TN763
  19. High power microwave power combiner,TN73
  20. One Dimensional Metallic Photonic Crystal,TG111
  21. Super- radiation mechanism RBWO preliminary study,O451

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Electronic components, assemblies > Microwave transition elements > Reversing switch > Waveguide to change the switch
© 2012 www.DissertationTopic.Net  Mobile