Dissertation > Excellent graduate degree dissertation topics show

Investigation on the Anti-disturbance Control of Permanent Magnetic Synchronous Motor

Author: WangWeiYing
Tutor: ZhangZuo
School: Zhejiang University
Course: Motor and electrical
Keywords: Permanent Magnetic Synchronous Motor(PMSM) Load Torque Observer inertia identification
CLC: TM341
Type: Master's thesis
Year: 2012
Downloads: 271
Quote: 2
Read: Download Dissertation

Abstract


The permanent magnetic synchronous motor (PMSM) is widely used in modern AC driving systems owning to its advantage in small volume, light weight, low torque ripple, stable speed and simplicity in control when it is adopted by vector control. As PMSM is a multi-variables, non-linear and strong coupling system, the conventional PI controller can’t perform well under the uncertain factor as the load torque disturbance and the parameter variation. Since the high performance PMSM system should guarantee no static errors and rapid response to dynamic command, anti-interference should be noticed in PMSM control under variable load situation. On the base of analyzing the mathematical model of the PMSM, the linear mathematical expression under d-q axis is adopted by combining the vector control algorithm. Then the simulation model and the experiment of the PMSM vector control system is built by adopting the rotor oriented vector control and the systemFull-order and reduced-order load torque observer are separately proposed according to the mathematical equation of the PMSM and the comparison is given according to the simulation results. The consequence indicates that the reduced-order load torque observer has the advantage of simple design, less tuning parameters, accurate estimation and good robustness to load torque disturbance.As the motor inertia is a key parameter to the observer model, research of on-line estimation to the motor inertia is done to guarantee the veracity of the load torque observer. Principles of both gradient correction method of parameters (GCMP) and recursive least square (RLS) method with forgetting factor are detailedly introduced. Then the mathematical expression of the inertia identification is calculated according to the formula of the PMSM and the simulations of both algorithms are built. The simulation demonstrates that the identification precision is higher under GCMP while the convergence time of the identification is shorter under the RLS. So GCMP is adopted in the system.Finally,200W rated hardware system is designed and developed to verify the accuracy of the motor inertia identification under the GCMP, the effectiveness of the reduced-order load torque observer and the improvement of robustness to the motor speed control with the reduced-order load torque observer.

Related Dissertations

  1. Research on the Performance of AC PMSM Servo Controller System,TM921.541
  2. Research on the Speed-adjustment System for Permanent Magnet Synchronous Motor,TM341
  3. The Study for Inertia Identification and Self-tuning of Controller Parameter of Numerical Control Machine Feeding System,TG659
  4. Research on Key Technologies of Permanent Magnet Sysnchronous Motor Engineering Servo System,TM341
  5. The Research on Auto-tuning Technology of AC Servo System,TM921.541
  6. Dynamic Control of the Permanent Magnet Assisted Reluctance Synchronous Machine,TM341
  7. Research of Identification of Coal and Rock and Load Torque Observer of Roadheader Based on Multi-sensor Information Fusion,TD421.5
  8. The Study of Adaptive Vector Control System for Asynchronous Motor,TM343
  9. The Study on Nonlinear Controller with Adaptive Torque in Asynchronous Motor System,TM343
  10. Research on Torque Observation and Compensation Control of Permanent Magnet Synchronous Motor,TM341
  11. Based on backstepping AC motor control research,TM34
  12. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  13. Parameterization Design and Research of Permanent Magnet Synchronous with Fractional-slot and Concentrated Winding,TM341
  14. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  15. Research on High Efficiency Interior Permanent Magnet Synchronous Motor,TM341
  16. Research on Synchronous Motor Excitation Control System,TM341
  17. Initial Rotor Position Estimation for PMSM,TM341
  18. Research on an Axial/Radial-Axial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicle,TM341
  19. Design of Servo-Control System of PMSM Based on IRMCK201,TM341
  20. FPGA-based motion control system design,TM341
  21. Research on Vector Control System of PMSM Based on Sliding Mode Controller,TM341

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Synchronous motor
© 2012 www.DissertationTopic.Net  Mobile