Dissertation > Excellent graduate degree dissertation topics show

Research on a 3-D.O.F Platform Driven by Giant Magnetostrictive Actuator

Author: LiJianQiang
Tutor: YangBinTang
School: Shanghai Jiaotong University
Course: Mechanical Design and Theory
Keywords: drive platform GMA adaptive control flexure hinges dynamic model closed-loop control
CLC: TH703
Type: Master's thesis
Year: 2012
Downloads: 89
Quote: 1
Read: Download Dissertation

Abstract


In last decades, high-tech industries are well developed in many countries. Manufacturing of products in many areas such microelectronics industry and optical industry often demands a delicated environment like gentle vibration or precision positioning. This thesis is a study on 3-d.o.f platform driven by giant magnetostrictive actuators. A series of simulations and experimental tests are carried out. The study using three giant magnetostrictive actuators (GMAs) as drivers, takes displacement for feedback which is measured by laser displacement sensors. In addition, adaptive algorithm is using for control of the GMA. The work could be summarized as follows:In chapter 1, the significance of the study and the development of drive platform are presented. The contents of this thesis are introduced.In chapter 2, a new kind of 3-d.o.f. drive platform is introduced, finite element analysis is taken on flexure hinges and the constitutive model of GMA is described. Eventually, the dynamic model of the system is established. According to the model, a simulation system based on SIMULINK is carried out. The simulation results verify the model and may serve for the active control analysis of the platform system.In chapter 3, study on active control of a single GMA is carried on. The difference of PID control and minimum variance control is clarified. The significance of introducting inverse compensation controller is discussed.In chapter 4, some basic characteristics of 3-d.o.f drive platform are tested. On the basis of chapter 3, control method is extended to 3-d.o.f drive platform. Coupling and control stability problem are discussed.In chapter 5, experimental system of the GMA and 3-d.o.f drive platform is established for experimental verification.In chapter 6, main work of the thesis is summarized, and the further researches are dicussed, finally.

Related Dissertations

  1. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  2. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  3. Based on supply and demand balance of Jining City Water Resources Allocation,TV213.4
  4. Analysis of Software Outsourcing Industry of Jiangxi Province,F426.672
  5. Large Belt Conveyor Dynamics Modeling and Software Development,TH222
  6. Development of CT’s High Voltage Generator Filament Driving Power Supply,TM46
  7. Research of Adaptive Active Noise Control Based on Neural Network,TP183
  8. The Study of Heat Exchange Station Heating System and the Design of Intelligent Control Program,TP273
  9. Design of the Adjustable Parameter ECG Signal Generator Based on DSP and MCU,TP368.12
  10. Synthesis and Characterization of Antibacterial Dental Composite,R318.08
  11. Preparation of Polymer GMA-IDA-grafed Magnetic Microsphere and Its Immobilization of Tyrosinase,O631.3
  12. The Modified Harmony Search Algorithm with Control Parameters Co-evolution and Its Application,TP391.3
  13. PID Paramenter Optimization of Shunting and Winch Control System Based on Oline Adaptive Genetic Algorithm,TP18
  14. Research on Adjustment Mechanism for Secondary Mirror of Large-Aperture Telescope,TH743
  15. Bis-GMA -based organic monomer molecular design and its impact on the performance of dental composite resin,R783.1
  16. Design and Researh on TRT Control System of 1350m~3 Balst Furnace,TF325.65
  17. Study on Biodegradability of Cationic Amine Collectors,X172
  18. Dynamical Analysis of Nitrogen and Phosphorus Transport in Wetlands,X132
  19. The ERP funds flow control system design and implementation,F275
  20. Numerical Simulation of Dynamic Characteristics for Force Measurement System on Moving Model under Cross-wind,U270.11

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > General issues > Structure
© 2012 www.DissertationTopic.Net  Mobile