Dissertation > Excellent graduate degree dissertation topics show

Micro-power Active Clamped Resonant DC-link Inverter DC-link Control and Parameter Optimization Design

Author: ChenQinYe
Tutor: ZhangDeHua
School: Zhejiang University
Course: Electrical Engineering
Keywords: Two Amplitude Control Resonant DC-link No Short-Circuit Control Strategy Loss Analysis
CLC: TM464
Type: Master's thesis
Year: 2012
Downloads: 31
Quote: 0
Read: Download Dissertation

Abstract


The active clamp resonant DC-link inverter (ACRDCLI) achieves soft-switching for the switching devices in inverter. ACRDCLI has the advantages of simple structure and high efficiency. With the Two-Amplitude control technique, the resonant loss is reduced and the converter’s output performance is improved. The micro-power ACRDCLI should have the characteristics of high efficiency and long life. But the traditional ACRDCLI clamping voltage balance control strategy has a disadvantage of great loss in high-power. Therefore it is necessary to solve the problem brought by traditional DC-link control strategy. The parameters are optimized in order to achieve high efficiency.Firstly, the working process of the DC-link is analyzed in this paper. In order to make the DC-link work normally, the clamp capacitor voltage must be balance. The reason for the change of clamping voltage is analyzed. A no short-circuit control strategy is introduced. According to the loss estimation method, the loss of the circuit with no short-circuit control and short-circuit control strategy are calculated with MathCAD. The clamp capacitor value is calculated while its ripple was restricted to 20%. Secondly, the default parameters are given. The MathCAD software draws circuit operation waveform with different clamp coefficient, characteristic impedance, resonant frequency and switching frequency. The influence of various parameters on the loss of the DC-link is analyzed. According to the equivalent resistance loss and clamp switching loss calculation, the parameters of the micro-power inverter were designed. At last the inverter was simulated with matlab/simulink. The main parameters of the waveform were obtained.The results indicate that:compared to short-circuit control, the micro power ACRDCLI with no short control can reduce the loss of inverter and choose film capacitor as the clamp capacitor. The losses do not have much decrease but a big value clamp capacitor should be selected. The right shutdown current of clamp balance is difficult to be selected in the micro-power. Therefore, the micro-power ACRDCLI is more suitable to use short -circuit control strategy. When the parameters are selected, a high resonant frequency and a low switching frequency should be selected. The ratio of the resonant frequency and the switching frequency is selected as large as possible. If the maximum critical value is taken as the shutdown current, the losses of the DC-link could be minimized by taking 1.2 as the clamping coefficient and 10 as the characteristic impedance.The research of this paper is supported by natural science foundation of china (No.51107117).

Related Dissertations

  1. Research on Rare Earth Electrolysis Power Supply Based on PS-FB-ZVZCS,TM461.5
  2. Analysis of Energy-saving Potential for the Regenerative System of Turbine Unit,TM621
  3. Low cost low power photovoltaic inverter Research,TM464
  4. The Study on Efficiency Optimization of Grid-connected PV Inverter,TM464
  5. Analysis on the Thermal Economy in 300MW Unit of Laicheng Power Plant after Overhaul,TM621
  6. Environmental values ??in the highway construction program than the selected application,U412.1
  7. On-Line Calculation on Thermoeconomic Indicators for a Large Fire Power Generating Unit,TM621
  8. Research on the Key Technologies of Photovoltaic Power Generation System,TM615
  9. Implementation of Line Loss and Online Calculation Analysis in Distribution Network,TM714.3
  10. Modeling High-power IGBT and Transient Analysis,TN386
  11. Design and Analysis of Ultra-high Speed Permanent Magnet Brushless DC Motor for Mortoried Spindle,TM33
  12. Study on Urban Optimal Seismic Fortification Criterion,TU352.11
  13. The Resonant Soft-Switching PWM Power Converter and Its Nonlinear Analysis,TM46
  14. Research on Three-Phase High Power Factor Rectifier for Aviation Applications,TM461
  15. Research on Energy-loss Analysis Model for Coal-fired Power Unit,TM621
  16. The Research of Energy-saving Potential and Energy-conservation Programmes in Haibowan 330 MW Power Plant,TM621
  17. Development of Unit On-Line Performance Monitoring System and Investigation on Knowledge Discovery in Power Plant Monitoring Data,TM732
  18. Analysis of the Benefit and Harm on Population and Factors of Production Tending to the Coast in Our Country and Study on the Control Measure,C924.24
  19. A Novel Two-Amplitude Control Strategy for Active-Clamped Resonant DC Link Inverter,TM464
  20. Research on Two-Stage Low Power Inverter,TM461

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter > Inverter
© 2012 www.DissertationTopic.Net  Mobile