Dissertation > Excellent graduate degree dissertation topics show

Study on Rheo-die-casting Process of Semi-solid Aluminum Alloy Slurry with Indirect Ultrasonic Vibration

Author: ZhuZeMing
Tutor: WuShuSen
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: indirect ultrasonic vibration semi-solid slurry A356 alloy non-dendritic microstructure rheo-die-casting mechanism
CLC: TG249.9
Type: Master's thesis
Year: 2010
Downloads: 40
Quote: 0
Read: Download Dissertation

Abstract


Semi-solid metal forming is considered as one of the new and advanced technologies in twenty-first century. Rheoforming has attracted the attention of the academic and manufacturing fields because of its unique advantages such as energy-saving, low costs. In this paper, high-energy ultrasonic field’s effects on microstructure and mechanical behaviors of A356 alloy was researched, the mechanism of semi-solid slurry preparation of A356 alloy by indirect ultrasonic vibration(IUV) was studied.The technique of semi-solid aluminium alloy slurry preparation by IUV and the relevant equipment were improved. After functional test and stability test in this research, the technique worked more stably and efficiently.The effects of parameters such as the vibration time and the pouring temperature after IUV on primary Al crystals of A356 alloy were studied. The results show that, with the prolonging of the time during IUV, the average grain diameter of primary Al tended to decrease firstly and then increase, the least diameter appeared after 40-60s vibration, the grain shape coefficient of primary Al tended to increase firstly and then decrease, the maximum value was obtained after 60s vibration. With the pouring temperature dropping, the average grain diameter of primary Al grew up obviously from 55μm to 100μm, the grain shape coefficient of primary Al increased firstly and then decreased, the maximum value was obtained at 611℃. The effective temperature of IUV was between 606-620℃.The influence of parameters such as the vibration time and the pouring temperature after IUV on microstructure and mechanical behaviors of the semi-solid rheo-die-casting A356 alloy was discussed. The result shows that the effect of the vibration time was more remarkable, the highest mechanical properties was obtained after 40-60s vibration, compared with traditional die castings, the tensile strength and elongation of the rheo-die-casting were raised by 10.9% and 93.5% respectively.The mechanism of semi-solid slurry preparation of A356 alloy by indirect ultrasonic vibration was studied. The results show that,in the process of indirect ultrasonic vibration, there have obvious characteristics of ultrasonic vibration such as acoustic streaming, cavitation and thermal effect, and characteristics of high-frequency mechanical vibration such as vigorous surface agitation, the increase of the nucleation which induced by falling off of solid particles formed on the crucible wall. Melt treated with IUV experiences the combined action of ultrasonic and high-frequency mechanical vibration rather than single mechanical vibration effect.

Related Dissertations

  1. Study on Hermetic EDGE Sealing of Anodic Bonding for Vacuum Glazing,TQ171.1
  2. Kunming Transient Population Community Present Situation, Question and Countermeasure Preliminary Study,C924.25
  3. Incentive Mechanism Research of the New Generation of Migrant Workers,F272.92
  4. Gel - Foam Preparation of porous alumina insulation materials,TQ174.1
  5. The Research on Sulfate Leaching Properties of Cation-exchange Resin Used in Power Plants,TQ425.23
  6. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  7. Practice and prospects of the Clean Development Mechanism in China,X38
  8. Curing Mechanism and Properties of Fluorenyl Epoxy Resin,TQ323.5
  9. Studies on the Key Technology of the Grinding Device for the Polymer Particles,TQ315
  10. The Dai eco - culture and its legal protection,D922.6
  11. Effects of CO2 Concentration and Nitrogen Application on Grain Yield, Quality Formation and Their Physiology Mechanism in Winter Wheat,S512.1
  12. The Research on Higheragricultural College Students’ Entrepreneurship,G647.38
  13. On the Simulant Research of the Pneumatic Cleaning Mechanism of Mini-combine Harvester,S225.3
  14. Studies on Flocculating Mechanism of Lactobacillus Flocculating Starch in Sweet Potato Slurry and Isolation, Identification and Characterization about Active Ingredients,TS231
  15. Studies on the Construction of Teacher’s Incentive Mechanism in Shandong Xiehe University,G647
  16. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  17. Construction of the Question Mechanism of Teaching Chinese in Junior Middle School,G633.3
  18. On diversified civil disputes settlement mechanism,D926
  19. The Study about Extracorporeal Shock Wave Therapy for Rotator Cuff Injury,R687.2
  20. Chongqing regional differences in the supply of public goods and Equalization Mechanism Research,F224
  21. Study on Supplier Performance Evaluation System of Company-A(ShenZhen),F426.63

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Special Casting > Other special casting
© 2012 www.DissertationTopic.Net  Mobile