Dissertation > Excellent graduate degree dissertation topics show

The Design for Micro-ohmmeter Based on LMS

Author: DengJiangHai
Tutor: YaoWei；YanWenJun
School: Zhejiang University
Course: Control Theory and Control Engineering
Keywords: Micro-resistance CCSC LMS Error Analysis Weak Signal Calibration
CLC: TM934.1
Type: Master's thesis
Year: 2012
Downloads: 181
Quote: 0
Read: Download Dissertation

Abstract


It is common to measure micro-resistance for the quality and performance of equipment in engineering practice. However, this can’t be done perfectly by the digital multimeter. So this paper presents a design solution of micro-ohmmeter. Besides, it also have simulated and tested for this design solution.The whole system is divided into two parts:the hardware system and the software system. The hardware system consists of a constant-current source circuit (CCSC), a signal processing circuit, A/D and D/A converter circuit, other peripheral circuits and the power module; the software system is mainly composed of the initialization subroutine, data collection subroutine, data processing subroutine and some interruption subroutine. Some key problems which restrict the measurement accuracy of micro-ohmmeter have been found in the process of design, and some solutions have been presented accordingly:Using four-wire measuring method to eliminate the wire resistance, improving the common CCSC for resistance matching problem, adopting LMS to filter noise, applying positive and negative current to remove the thermoelectric potential, presenting a simple way to weaken the influence of contact resistance in calibration effectively.

Related Dissertations

  1. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  2. Hardware Implementation of LEO Satellite Channel Characteristic Emulation,TN927.23
  3. The Research of 3D Human Motion Capture Based on Reference Points,TP391.41
  4. Camera Calibration and Position and Pose Detecting on Vision Measurement System of PCB,TP391.41
  5. Design of Gyro Stabilized Pod Control System,TP273
  6. Approach for Calibration and Orientation of Digital Camera Based on Linear Features,TP391.41
  7. Research on Key Technologies for Binocular Stereo Vision,TP391.41
  8. Detection、 Tracking and Localization of Multiple Moving Objects Based on Omnidirectional Vision,TP391.41
  9. Error Analysis of English Translation of Chinese Public Signs,H315.9
  10. Research on Predistortion Technology of RF Power Amplifiers,TN722.75
  11. A Self-calibration Method of Camera Based on Binocular Stereo Vision,TP391.41
  12. Stereo Vision-based Ground Plane Obstacle Detection,TP391.41
  13. Research and Implementation of 3D Reconstruction Algorithm Based on Computer Vision,TP391.41
  14. Second-order Circulation Statistics-based Array Signal Processing,TN911.7
  15. Research and Application of Camera Calibration in Vision Measurement System,TP391.41
  16. Research on Technology of Terrain Measuring Based on Binocular Vision,TP391.41
  17. Research and Implementation of SCORM LMS based,TP311.52
  18. Research on Speech Sparse Basis and Projection Matrix Based on Compressed Sensing,TN919.8
  19. Electronic Dispersion Compensation in High Speed Optical Communication System with New Modulation Formats,TN929.1
  20. Fast Mapping Techniques and Applications Used in Traffic Accident Scene Based on DLT Theory,U491.31
  21. The Development of Fixed Dew Point Humidity Generator,TH765.53

CLC: > Industrial Technology > Electrotechnical > Electrical measurement techniques and instruments > Lumped parameter,the distribution parameter measurement and instrumentation > Resistance measurement and instrumentation
© 2012 www.DissertationTopic.Net  Mobile