Dissertation > Excellent graduate degree dissertation topics show

Study of the Flow Pulsation in the Water Pipe Supplied for the Water Jets

Author: ZhangZhiHui
Tutor: LiYanMin
School: Zhengzhou University
Course: Mechanical Manufacturing and Automation
Keywords: water jets flow pulsation pressure pulsation attenuator isolator CFD methods FLURNT software Flow field simulation
CLC: TS171
Type: Master's thesis
Year: 2010
Downloads: 23
Quote: 1
Read: Download Dissertation

Abstract


With the rapid development of spunlace non-woven fabrics industry, the problems happened in the spunlace non-woven manufacturing process were gradually attracted people’s attention. One of the problems is the flow pulsation in the water pipe supplied for the water jets. The flow pulsation in the water pipe will not only seriously affect the quality of non-woven fabrics, but also cause pipe vibration, even rupture and so on. Therefore, the study of the flow pulsation in the water pipe becomes particularly important.Introduction first describes the source and background of this issue, and then introduced the progress of research methods about the flow pulsation at home and abroad in recent years. The next chapter describes the ductwork supply water for water jets and the main problem about it. And the third chapter study the flow pulsation mechanism of triplex high pressure piston pump used in this system import and export with theoretical analysis method, and propose measures to attenuation the flow pulsation of high-pressure pump export and to separate the high-pressure pump import and the main water supply pipes (to use the pressure pulsation attenuator to attenuation the flow pulsation of high-pressure pump export and use the isolator to separate the high-pressure pump import and the main water supply pipes). Next chapterⅣandⅤanalyze the flow field of the pressure pulsation attenuator and the isolator based on the FLUENT software which is very professional by means of the computational fluid dynamics (CFD) method, then research and optimize some factors about their configuration which may affect the result. ChapterⅥproposes the experiment to verify the simulation model, and the attenuator had been applied in the actual production process.The last chapter is the summary of all the paper. That is, the problem about pipe vibration caused by the flow pulsation can be solved by to install the pressure pulsation attenuator at the high-pressure pump export and the isolator at the high-pressure pump import, also the paper provides a new method to solve similar problems-Computational Fluid Dynamics (CFD) method.

Related Dissertations

  1. Theoretical Study and Simulation of Hydrocyclone Separator,TH237.5
  2. Rubber isolator nonlinear theoretical modeling and experimental study of impact,TB535.1
  3. Powerful jet vortex spinning influencing factors and related technology research,TS104
  4. Based on polarization-independent optical superlattice device research,O437
  5. Numerical Simulation of Flow Fields in a Ramjet Isolator with a Divergent Angle,V235.21
  6. Simulation of Electric Field and Flow Field for the New 10KA Rare Earth Electrolysis Cell,TF845
  7. The Performance Analysis and Structural Design of the Digital Water Hydraulic Relief Valve,TH137.5
  8. The Development and Application of Down-hole Tools to Improve the Cementing Quality of Sidetracked Wells,TE925.2
  9. Development of Sma Semi-active Control Isolation Bearing and Its Analysis of Damping Effect,TU352.12
  10. The planter research on tobacco float seedling gas suction,S572
  11. Research on the Vibration Reduction of Dithered Laser Gyro Strapdown Attitude & Heading Measurement System,TN966
  12. Research on Effect of Construction of Yang-Cheng Lake Bridge for Beijing-Shanghai High Speed Railway,X524
  13. Research on Key Technologies of Mine Water-based Medium with High Flow Three-way Valve,TD355.3
  14. Study on Low Noise Valve Plate of Swashplate Axial Piston PUMP,TH322
  15. The Theory of the Gear Pump-Motor Unity Machine,TH325
  16. Research on the Simulation Method of the Flow Field in Fluid Coupling and the Torque Coefficient of Fluid Coupling,TH137.331
  17. Research on Rotational Electrode and Inner Jetted Dielectric Edm Milling Electrode Wear Compensation Method,TG54
  18. Modeling and Simulation of SiC_p/al Composites in EDM,TG661
  19. Design of the Five Degrees-of-Freedom Air Bearing Spacecraft Simulator,V416.8
  20. Dynamic Modeling and Self-converging Control of Electromagnetic Suspension Vibration Isolator,TB535.1
  21. On-line Intelligent Fault Diagnosis of Hydraulic AGC Servo Valve,TH165.3

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > Non-woven fabric > Basic science
© 2012 www.DissertationTopic.Net  Mobile