Dissertation > Excellent graduate degree dissertation topics show

Extraction of Dynamic Cutting Force Feature and Predition of Surface Integrity in Hard Turning

Author: LuoGuoTao
Tutor: LiuXianLi
School: Harbin University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: hardened steel PCBN tool hard turning dynamic cutting force feature surface integrity
CLC: TG51
Type: Master's thesis
Year: 2010
Downloads: 123
Quote: 1
Read: Download Dissertation

Abstract


Hardened steel is a typically hard processing material, its hard turning by adopting PCBN tool can improve machining efficiency, drop energy consumption, reduce investment and decrease pollution, moreover, obtain surface quality that is equivalment with grinding and even exceeds grinding. Therefore, hard turning technology has broad application prospect. However, for this new technology, aspects of dynamic cutting force feature extraction and surface integrity predition in hard turning are lack of systematic study, thus its extension in actual production is seriously impeded.In this paper, hard turning GCr15 hardened bearing steel by PCBN tool is regarded as research object. Cutting force in hard turning is measured accurately by using cutting force data acquisition and analysis system based on LabVIEW. Dynamic feature of cutting force signal in hard turning is extracted effectively. Comprehensive predition of surface integrity based on BP artificial neural network is realized. And thus, certain theoretical basis and technical support are provided for extension and application of hard turning technology.Cutting force data acquisition and analysis system is developed by LabVIEW software platform. This system is able to make data acquisition of cutting force signal on forms of dynamic waveform and real-time data, and also the collected cutting force original signal is conducted by data playback, data interception, data filtering and data statistical analysis.The cutting force data acquisition and analysis system is applied to the research of hard turning experiment, analysis acquired cutting force change law under different condition and hard turning force of traditional theory comparatively, and further validate reliability and feasibility of this system.According to limitations of time domain analysis and frequency domain analysis of signal, adopt wavelet transform method to analysis hard turning force signal comprehensively in time-frequency domain. Apply Matlab software to compile program and achieve autocorrelation analysis, self-power spectrum analysis, wavelet decomposition and wavelet de-noising of hard turning force, so it is capable of understanding the feature of hard turning force deeply, and can also extract the feature quantity relevant to aspects of tool vibration and tool breakage effectively.Using BP artificial neural network method, combined with the data obtained by hard turning experiment, taking tool geometric parameters and cutting parameters as input, taking eigenvalue of residual stress and white layer as output, predition models of residual stress and white layer in hard turning are established. Based on predition models that have been constructed, comprehensive predition system of surface integrity in hard turning is developed by utilizing Matlab software to compile program, predition of residual stress and white layer in hard turning are implemented.

Related Dissertations

  1. Stitching hardened steel ball head milling force modeling and simulation and experimental study,TG54
  2. Process Optimization in High-efficiency Turning Inconel 718,TG51
  3. Research on the Surface Integrity of High-Speed Milling of Inconel 718,TG54
  4. The Resarch of Heat Transfer Theory by Noanfory Jei Lubrication and the Evaluation of the Surface Integrity in Grinding,TG580.1
  5. Gear carburizing steel deformation and fatigue properties of,TG156.81
  6. Rolling Contact Fatigue Life Prediction Based on the Surface Integrity Induced by Grinding Process,TG580.6
  7. Research of Multi-cutting and Surface Integrity on High-Low Double Speed WEDM,TG484
  8. Cutting Force Modeling and Experimental Research on High Speed Milling of Hardened Steel with Ball-end Mill,TG54
  9. Surface Integrity and Cutting Parameters Optimization in Machining of New Titanium Alloys,TG506
  10. Experimental Research on Hydration Polishing Mechanism of Sapphire,TB302.4
  11. Experimental Research on Turning Process and Surface Integrity with Minimum Quantity Lubrication,TG51
  12. Experimental Research on High Speed Grinding Titanium Alloy with CBN Wheels,TG580.6
  13. High-speed milling of titanium alloy Ti6Al4V tool wear,TG54
  14. Study on Milling Mechanism and Process Parameters Optimization of 69111 Stainless Steel,TG54
  15. Study on the Tool Edge Preparation for Milling Ti6Al4V,TG714
  16. Research on Surface Integrity of Ti-6Al-4V in High Speed Cutting and the Development of Cutting Parameters Database,TG54
  17. Study on FE Simulation of Chip Formation and Temperature Field during High Speed Machining Hardened Steel,TG501
  18. Applied Study on High-speed Milling Hardened Steel,TG54
  19. Research on Mechanism of Ultra-high Speed Milling of Hardened Steel,TG54
  20. Study on Hard Turning Process of the Stellite Alloy Welding Roll,TG51

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Turning and lathe ( lathe )
© 2012 www.DissertationTopic.Net  Mobile