Dissertation > Excellent graduate degree dissertation topics show

Research on Micro-edm Pulse Generator and Strategy of Servo Controling

Author: YuJie
Tutor: DiShiChun
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: Micro-EDM Pulse generator Discharge status of detecting high frequency pulse Pulse width voltage
CLC: TG661
Type: Master's thesis
Year: 2010
Downloads: 115
Quote: 1
Read: Download Dissertation

Abstract


With the development of Micro/Nano Science and Technology, countries all over the world have been paying high attention to Micro-Machining, which features with small shape and size or operations under super-small scale. As one of the important part of Micro-Machining, Micro-EDM has an important application value in the field of aerospace, precision instruments, medical equipment, textile printing and automotive industries.Based on the analysis of discharge and breakdown characteristics of Micro-EDM generator and transistor pulse generator, the PWM technology was employed to get the voltage adjustable from 0 to 120V and a multi-functional micro-EDM generator collected RC, controled RC, transistor and high frequency grouping discharge modules that can achieve high-frequency and tiny power discharge was also developed exploiting the principle that a series of variable sequential logic pulse producted the controller whose core are PIC microcontroller and Complex Programmable Logic Device (CPLD) driver high-speed switching devices. The advantages of many detection methods, like average gap voltage, average Pulse-Width detection and the average digital Pulse-Width detection, are combined together to propose a transistor flexible pulse voltage detection strategy characterized by a simple circuit structure, without affecting the duty cycle reset, good pulse voltage following performance during discharging. The sofeware system of Micro-EDM with online seting parameter and real time feedback fuction is constructed with the PC interface control program of Visual C++, PIC microcontroller’s serial communication program, Scenix microcontroller’s A/D converter results high-speed sampling and statistical analysis program, and CPLD’s program of high-frequency pulse generator. Many experiments showed detecting error of traditional average gap voltage detection method is 16 times that of transistor flexible pulse voltage detection strategy, which fully indicated that the new Pulse-Width voltage detection method has good pulse voltage following performance. It was observed that the RC-generator can produce lower energy discharge and processing gap smaller by experiments to machining micro axis and micro holes using the multi functioned Micro-EDM generator. Therefore, RC-type micro-EDM generator could be more suitable for micro-structures, where accuracy and surface finish are of prime importance.

Related Dissertations

  1. Thyristor Control System Design Pulse Discharge in Water System Design,TN34
  2. Data Analysis in UHF PD Monitoring for Power Transformers,TM41
  3. Study on High Frequency Pulse Tube Cryocooler with Precooling at Liquid Helium Temperature,TB651
  4. Development of a New High Voltage Pulsed Electric Field Sterilization Apparatus,TS203
  5. Design of Mechanical Part for Micro Edm Machining Device and Simulate of Temperature Field for Control Cabinet,TG661
  6. Study on Micro Energy Pulse Generator Used for Micro EDM,TG661
  7. Design and Experiments of a Three-Dimensions Micro-Edm Stage,TG661
  8. A Nanosecond, High Repetition Rate Pulse Switch with Water as Dielectric,TM564
  9. Research on Equipmentand Processingtechnology of Micro-Edmand Micro-Punching,TG661
  10. Study on Discharge Characteristics and Servo Control of Micro EDM Using Electrostatic Induction Feeding Method,TG661
  11. Molecular Dynamics Simulation of Micro Edm Machining Process Using Minimal Discharge Energy,TG661
  12. Analysis and Design on High Frequency Inverter System,TM464
  13. Photo Catalytic of High-frequency Pulse-deposited Ni/Nano-TiO2 Composite Coating,TQ153.3
  14. UG-based micro-EDM Milling Technology and Experimental Research,TG661
  15. Research on Multi-Mode Pulse Generator System for Array Holes of Micro-Jet Parts,TG661
  16. Theoritical and Experimental Research on Micro Electric Discharge Machining of Low Resistance Mono-crystalline Silicon,TG661
  17. Basic Research on a Hybrid Excitation Type Compensated Pulsed Alternator,TM31
  18. Helium ionization detector design,TH83
  19. Study of the Influence of Material Internal Structure on Micro-machining by EDM,TG661
  20. Research on Modeling Aspect Ratio of a Micro Hole Drilled by EDM,TG661
  21. Research and Realization of Distributed Optical Fiber Temperature Sensor Based on the Raman Scattering,TP212.11

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Special machine tools and processing > Electric machines and their processing
© 2012 www.DissertationTopic.Net  Mobile