Dissertation > Excellent graduate degree dissertation topics show

Research on Numerical Simulation of Temperature Field of Cold-Rolled Pure Titanium Strip Coil during Annealing Process

Author: ChenLinXia
Tutor: XiangShunHua
School: Shanghai Jiaotong University
Course: Power Engineering
Keywords: titanium strip coil vacuum heat treatment mathematical model temperature field numerical simulation
CLC: TG156.2
Type: Master's thesis
Year: 2012
Downloads: 94
Quote: 0
Read: Download Dissertation

Abstract


With the development of large aircraft project, desalination and coastal power stations in China, the demand for titanium coil is significantly increasing. However, the domestic industrial production of titanium coil is still a blank. To meet the market demand for titanium strip, Baosteel Co., Ltd. established the nation’s largest production base of titanium coil. The implementation of this project will make the quality and output of our titanium strip significantly improved. For the vacuum annealing of large titanium strip coil, there is no related experience in domestic. It is an urgent task for us to develop the vacuum annealing technology for titanium strip coil as soon as possible. To determine the optimal annealing process parameters, optimize process system, in order to improve production efficiency, it is a must for us to have a more accurate grasp of the temperature distribution of titanium strip coil during annealing process in the vacuum furnace.In this paper, radial thermal conductivity of titanium coil was determined through solving inverse problem of heat conduction. On the basis of the analysis of heat transfer process in the vacuum furnace, using Haute Rama-line method to determine the radiation angle coefficient between the two titanium coils placed side by side, the temperature model of titanium coil was established. ANSYS software was used to carry out the simulation calculation, and the calculated results were verified by experimental results. Finally, the influences of structure parameters and annealing process parameters on the heating time of titanium coil during annealing process were analyzed. The study not only provides theory basis for making the annealing process, but also has practical meaning for reducing the time of annealing process.Main tasks of this paper are as follows:(1) Using the sample block of superimposed titanium plate to simulate titanium coil, the heating process was measured in the test furnace. Through solving the inverse heat conduction problem, the coefficient of thermal conductivity between titanium plates was determined.(2) The heat transfer conditions during the annealing process were analyzed, and the two-dimensional model, which based on the hypothesis that there was no radiation influence between adjacent titanium coils, was established. The key parameters of boundary conditions were determined. Numerical simulation of temperature field of titanium coil by using ANSYS software. The comparison between the experimental data and calculated results show that, the two-dimensional calculated results can only predict the temperature distribution of the side of titanium coil, which is away from another coil.(3) On the basis of two-dimensional simulation, considering the effects of radiation between the adjacent titanium coils, using Haute Rama-line method to determine the radiation angle coefficient between the two coils, the there-dimensional model was established. The three-dimensional simulation results agree well with the experimental data, and the relative error meets the accuracy requirement of engineering application. According to the 3D simulation results, after 25.7 h, temperature "cold spot" has reached the minimum annealing temperature (670℃).(4) From the two aspects, structure parameters and the annealing process parameters, the impact factors on annealing heating time of titanium coil were analyzed. The results show that the heating time will be extended by increasing the outer diameter of titanium coil, but this effect will be smaller and smaller as the diameter increasing; When the radial equivalent coefficient of thermal conductivity is relatively small, It is more effective to shorten the heating time by increasing its value; The influence of the height of titanium coil on the heating time is more significant than the influence of radial equivalent coefficient of thermal conductivity and titanium coil diameter. In fact, they are highly almost in a linear relationship. Cycle gas flow has little effect on annealing temperature field of titanium coil.

Related Dissertations

  1. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  2. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  3. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  4. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  5. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  6. Design and Simulate Analysis of Active Subsoiler by the Planetary,S222
  7. A company in the western region of refined oil a Distribution Optimization System Applied Research,F426.22
  8. The new media environment, corporate advertising media mix strategy study,F713.8
  9. Sham hose drum drive means and hydraulic system of the structure,TE973
  10. Changchun High- temperature low-pressure ridge containing wax reservoir development and technological measures,TE349
  11. Based on Pro/E Reconstruct Sprinkler Structure and Investigations on Internal Flow Characteristic of the Sprinkler by Numerical Simulation and Experiment Methods,TP391.72
  12. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  13. Ammonium Bisulfide Deposition Mechanism and Numerical Analysis of Multi-physics Coupling in Reactor Effluent Air Cooler,TE986
  14. Research of Deep Excavation Construction Process for Nearby Subway Section Action,TU753
  15. Exploration and Simulation on Semi-solid Billet by Induction Heating in Temperature Field,TG249.9
  16. Heat Transfer Process Analysis and Numerical Simulation of Tank Container,TH247
  17. Research on Process Optimization of Turbulence Pickling by Hydrochloric Acid Based on Frequency Conversion Technology,TG335.1
  18. The CFD Numerical Simulation of Rapid Gas-gas Mixing,TQ051.71
  19. Three-dimensional Numerical Simulation of the Combustion Flow of the Multi-Jet Flame Combustion Chamber,TQ052
  20. The Temperature and Flow Field Simulation of Hot Air Heating for a Tall Building,TU832
  21. Researching and Application of Kaiping Power System Load Forecasting Method,TM715

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Heat treatment > Heat treatment process > Annealing
© 2012 www.DissertationTopic.Net  Mobile