Dissertation > Excellent graduate degree dissertation topics show
A Study of Electroplastic Roll Hemming Process
Author: FangLinQiang
Tutor: DongXiangHuai
School: Shanghai Jiaotong University
Course: Materials Processing Engineering
Keywords: roll hemming process electrically-assisted manufacturing (EAM) roll hemming force stress relaxation
CLC: TG306
Type: Master's thesis
Year: 2012
Downloads: 80
Quote: 2
Read: Download Dissertation
Abstract
|
Electroplastic effect refers to the phenomenon that the flow stress decreases significantly with the application of high density current pulses on the plastic deformation of materials. Since the electroplastic effect was found in the 1950s and 1960s, a lot of researches were carried out to study the mechanism and application of electroplastic effect, but the application scope is still limited at present. This paper presents a new application of electroplastic effect: electroplastic roll hemming process. And the preliminary study and discussion on this process is carried out in this paper, as summarized below:1. According to the problems existing in roll hemming process, the help of electroplastic effect in solving these problems is discussed. And the feasibility of this process is also analysed.2.Based on the analysis of the problems about application of electric pulse, insulation, et al., which are indispensable in realizing electroplastic roll hemming process, a set of electroplastic roll hemming equipment is designed.3. Based on the principle of work balance, an analytical model of roll hemming process with straight edge is established, and computational formula for roll hemming force at each step is derived. The predicted roll hemming force agree with the result of production experience,and have the upper bound property.4.An electric pulse assisted stress relaxation test is carried out, to study the stress relaxation behaviour of metal under the affect of electric pulse. And the influence of thermal expansion is estimated and compensated. At last, the influence of electric pulse on the stress relaxation behavior of QP980 is discussed.
|
Related Dissertations
- Study on the Microstructure and Properties of 1Cr10NiMoW2VNbN Steel Used for Ultra-Supercritical Gas Turbine,TG142.1
- Study on the Microstructure and Stress Relaxation Behavior of INCONEL Alloy 783,TG132.32
- Study on Intrinsic Fbg-based Smart Structures,TP212.6
- Mechanical Behaviors of Zr-based and Ti-based Amorphous Alloys,TG139.8
- Brownian Dynamics Numerical Simulation for Stress Relaxation Process of Polymer,O631.3
- Static Viscoelastic Constitutive Model Based on Fractional Derivative and Its Application,O631.21
- Research on Stress Relaxation and Creep Properties of the Ultra-Fine Grained Aluminum-Magnesium Alloy,TG146.22
- Research on Relaxation and Controlling of Welding Residual Stress in Welded Joint,TG404
- Study on the Aging Relaxation Mechanism of Rubber at Different Compression Rations,TQ330.1
- Gasket Creep Performance of Flanged Bolted Connection System,TH136
- Formula Investigation and Property Evaluation of Curing Envelope,TQ330.7
- Study on the Regeneration Technology of Weast Rubber,X705
- The Study of the Structure, Properties and the Blending Structure Homogenization of Star-SSBR/BR Blending,TQ330.1
- Study on Stress Relaxation of Polymer and Fractional Maxwell Model,O631.13
- Study on Tensile Behaviour under Low Temperture and Stess Relaxation of 60Si2Mn Steel,TG142.15
- The Continuous Loading Consolidation Test Method Research on the Soil,TU452
- 60Si2MnA spring steel accelerated stress relaxation test technique,TG142.15
- Study on Fatigue Crack Propagation Properties of Al-Zn-Mg Alloy Welded Joints,TG405
- Under different temperature conditions birch and ash wood stripes bending and stress relaxation properties of,S781.29
- Study on Test System of Mechanical Properties for Thin Wood Composites,TH873
CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > General issues > Pressure processing
© 2012 www.DissertationTopic.Net Mobile
|