Dissertation > Excellent graduate degree dissertation topics show

The Research of the Low Frequency Three-dimensional MEMS Vector Hydrophone

Author: GuanYu
Tutor: HongLianJin
School: Harbin Engineering University
Course: Underwater Acoustics
Keywords: vector hydrophone low frequency MEMS capacitance acceleration sensor
CLC: TB565.1
Type: Master's thesis
Year: 2010
Downloads: 89
Quote: 1
Read: Download Dissertation

Abstract


The trend of development of vector hydrophone turns to low frequency, little size, high SNR for the demand of faraway detective and low frequency measurement. The MEMS vector hydrophone is a new solution of achieving high capability with small size.Basing on the demand of designing the vector hydrophone, we have designed the sense organ and external circuit of the capacitance acceleration sensor in the article, and four different types of vector hydrophone have been made and measured. The result of measurement shows that with high sensitivity(909mV/g) the self-noise of the vector hydrophone decrease obviously, which can satisfy the design request.We made six 3-D capsule vector hydrophones using the capacitance acceleration sensor in this article, the size of which isφ28×48mm, and the vector hydrophones have been measured in the standing wave pipe. The result of measurement shows the pressure sensitivity of 1#, 6# vector hydrophone is not less than -196.4dB,-200.1dB(0dB=1V/μPa,500Hz)separately, and the average pressure sensitivity (0-400Hz)of 2# vector hydrophone is -199.2dB(400), and the average pressure sensitivity (0-800Hz)of 12# vector hydrophone is -192.7dB(800),and sensitivity of pressure channel is -201dB(0dB=1V/μPa, 500Hz).The research shows that the MEMS vector hydrophone has following advantages: small size, low frequency, light weight, better directivity in work band, high SNR and so on.

Related Dissertations

  1. Generator Excitation System of the Anti-saturation Control,TM301.2
  2. Low-frequency elastic wave channel characteristics of the earth,TN914
  3. Acute low-tone sensorineural hearing loss clinical observation,R764
  4. Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
  5. Design, Modeling and Fabrication of Micropump Actuated by Laser-induced Shock Wave,TH38
  6. Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
  7. XLPE High-voltage Cable Insulation Monitoring and the Experimental Research,TM247
  8. Wafer Level Vacuum Packaging of MEMS Device by Solder Sealing,TN305
  9. SHS reaction bonding process research and application,TN405
  10. MEMS-based microfluidic PCR technology system development,TN492
  11. Sagnac interferometric fiber-optic sensor characteristics,TP212.14
  12. Six -axis micro- accelerometer electrostatic levitation design and system -level simulation,TH824.4
  13. Fabrication of Microscale Ordered-reinforced Composite and Its Mechanical Characterization,TB33
  14. MEMS-based sensor motion capture system development and design,TP212.9
  15. Ultra-low frequency voltage test systems research and development,TM855
  16. MEMS-based micro- fluxgate sensor technology research,TP212
  17. Six -axis micro- accelerometer electrostatic levitation control system,TH824.4
  18. Integrated Fiber Optic CE System,TN492
  19. Microchannels cavitation research,TH703
  20. Design of Wireless Low-frequency Vibration Inspection System for Offshore Platform,TP274
  21. Study on a Novel combined Fiber Optic Vector Hydrophone,TB565.1

CLC: > Industrial Technology > General industrial technology > Acoustic engineering > Underwater Acoustics > Underwater acoustic instruments and equipment > Underwater acoustic transducer , the hydrophone
© 2012 www.DissertationTopic.Net  Mobile