Dissertation > Excellent graduate degree dissertation topics show

Melting Point Meter Sequence Rise of Temperature and Experimental Reseach

Author: HanZhengQi
Tutor: ZhangSiXiang
School: Hebei University of Technology
Course: Instrument Science and Technology
Keywords: melting point determinate the PID algorithm MSC1210Y5 sequence rise of temperature serial port communication
CLC: TQ056.1
Type: Master's thesis
Year: 2011
Downloads: 26
Quote: 0
Read: Download Dissertation

Abstract


Just as its name implies,the melting point meter is an instrument for measuring organic crystal’s melting point. The organic crystal’s melting point is its extremely important inherent physical and chemical parameter. Also it is the characteristic temperature of the organic crystallization’s phase changing process. In the modern organic chemistry, measuring the crystal melting point is an essential method in analyzing the crystal’s purity. With the improvement of the producing process, the purity of the crystal material plays a very important role in the products’quality. But there still exist some difficulties in measuring the purity of the crystal material directly. So by measuring the crystal material’s melting point, the purity of the organic crystal can be determined, so as to confirm whether it does meet the product quality’s requirements.At present, the precision of the domestic melting point meter is generally lower than the overseas, yet its price stays high. Therefore, developing a kind of high-accuracy and low-cost melting point meter is urgently needed. Based on studying the development of the domestic and foreign melting point meter, we design out a kind of low-cost, high-accuracy, and good linearity melting point meter in this article. This melting point instrument has the advantages of simple hardware-structure and complete-functions. In this topic, we choose MSC1210Y5 monolithic integrated circuit which promoted by Texas Instruments (TI) Corporation of America as the core chip. It owns 24 high accuracy∑-△A/D switches, programmable amplifier, 3 times of 8051 essences speeds, large capacity Flash memories storage, and it supports SPI or I 2C buses and many auxiliary equipments. With high analog-digital integration rate, it is a kind of high-performance composite signal chip. The main subject of this article is to study the algorithm in melting point temperature control, so we established a kind of system algorithm which suits to the melting point based on the improvement and innovation of the existing control algorithm PID. We use LabView software assistance to complete the adjusting of the PID controller parameter. It not only improves the PID coefficient installation effect, but also gives the experimental results in the form of charts. As a result the tester can easily analyses the experimental results and shortens the whole research and development cycle. In summary, through the research of the algorithm in melting point temperature control, I have mainly completed the following tasks in this article:1. Through consulting the correlation domestic and international data, I select monolithic integrated circuit MSC1210 to complete the hardware circuit design, which not only simplifies the hardware of the circuit, but also saves the hardware cost.2. By sending the measured signal from the serial port communication to upper monitor for processing, I complete the parameter adjusting, optimize and debug PID algorithm coefficient, reduce the debugging cycle and also improve the accuracy of the coefficient installation under the assistance of the upper monitor.3. Through the comparative study of various algorithms, I select the suitable digital incremental PID algorithm for this article. Finally I complete the adjustment of the melting point control system’s non-linear error, and make some innovative research on sequence rise of temperature.

Related Dissertations

  1. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  2. The Development of a Serial-Type LCD Based on Embedded System,TN873.93
  3. Research on Master Controlling System of Miniature Mass Spectrometer Based on DSP,V447
  4. Research on Serial Communication Technology Based on the Networked Manufacturing,TH166
  5. Research on the Optimal Path Planning in Vehicle Navigation System,U463.6
  6. Design of Automatic Aluminum Winding Machine Numerical Control System,TP273
  7. Research on Reliability and Transient Break Detection of Electrical Connector,TM503.5
  8. Research and Development of Testing System on the Transmitting Module in Laser Fuze,TP311.52
  9. Design and Realization of Pulse Laser Energy Analysis System,TN241
  10. Research on Distributed Web Remote Monitoring System Based on Java Technology,TP273
  11. The Research on a CompactPCI Platform’s High Availability Application Based on VxWorks Real-Time System,TP311.52
  12. Design and Research for Automatic Sorting System of Electronic Element on Pipeline,TN605
  13. Based on data acquisition chip chip data acquisition system,TP274.2
  14. Development of Platform Flatness Error Detecting System,TG831
  15. Research on Delay Compensation of Network Control System,TP273
  16. The SCADA System of Pressure Testing,TH823.2
  17. Smart Car Navigation System,U463.6
  18. Design of LD Switching Power Supply with Power Adaption,TN248.4
  19. Tone pitch propeller simulation system design,U664.3
  20. Research and Application of a Low Profile Vehicle-borne Satellite Communication System,TN927.2
  21. Brushless DC Motor Control System Base on the PIC18F2431 Microcontroller,TM33

CLC: > Industrial Technology > Chemical Industry > General issues > Chemical machinery and apparatus, equipment > Chemical equipment, instrumentation and automation equipment > Chemical instruments, meters
© 2012 www.DissertationTopic.Net  Mobile