Dissertation > Excellent graduate degree dissertation topics show

The System Designing for Alignment and Adjustment of Direct-detection Doppler-lidar

Author: DongWeiJian
Tutor: QuYanChen
School: Harbin Institute of Technology
Course: Physical Electronics
Keywords: lidar GRIN lens defocusing align calibration
CLC: TN958.98
Type: Master's thesis
Year: 2010
Downloads: 182
Quote: 1
Read: Download Dissertation

Abstract


Doppler lidar based on the edge technique of Fabry–Perot etalon, and it has lots of advantages, such as high measure precision, high spatial and temporal resolution, high stability, miniaturization, and it becomes the only tool that can carry out three-dimensional wind measurements of the globe. However the Doppler lidar can only measure the radial component of the wind, we must develop the method of retrieval wind field in order to get the true wind vector. In the measurement of wind, we should get the message of wind speed in a certain scanning mode, so software programming is needed to control the scanning mode of wind field. The software system designed by this technology has simple frame, complete functions, friendly interface, short development cycle, so we choose it as the instrument of our software development.In this paper we first analyze the basic principle of Doppler lidar and the correlation theory of retrieval wind field. On this basis we develop the software system to control the mode of motion of rotating floor by LabVIEW, so we can control the scanning mode of wind field. After the discussion of various methods of retrieval wind field, we choose the VAP method to get the wind vector for attempt. And at last we obtain the wind field, we also analyze the result of retrieval wind field, in which the reason to effect the precision is found.Virtual Instrument has come out.It captures the signal through hardware,and processes data through software.This kind of instrument has totally changed our thoughts of traditional measurement instrument.The test system designed by this technology has simple frame,complete functions,friendly interface,short development cycle,so it has been broadly used in the field of automatization test and measure.In this paper, the theory of Doppler lidar and data acquisition and process is firstly introduced. I designed a data acquisition and processing system for Doppler lidar used LabVIEW as the software development platform,took many measurements through the signal generator.And then I used LabVIEW simulate the echo signl of the lidar.Finally,I took many measurements of the echo signl of the lidar,and deal with the data through the system I designed.

Related Dissertations

  1. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  2. The Airborne LiDAR and LiDAR Points-cloud’s Quick Processing Method,TN959.73
  3. Approach for Calibration and Orientation of Digital Camera Based on Linear Features,TP391.41
  4. Research on Key Technologies for Binocular Stereo Vision,TP391.41
  5. Research on High-resolution 3D Imaging Lidar Techniques,TN958.98
  6. The Study on Modeling and Simulation of Infrared Lidar to Measure Methane Concentration,TN958.98
  7. Study on Airborne LiDAR Strip Adjustment Based on Attitude Correction,P225.1
  8. Airborne LiDAR Filtering by Fusing Multi-features,TN958.98
  9. Research and Implementation of 3D Reconstruction Algorithm Based on Computer Vision,TP391.41
  10. Research on 3D Reconstruction Technology with Marking Points and Its Application to Dimension Measurement of Castings,TP391.41
  11. Research and Implementation of the 3D Reconstruction Based on Surface Structured Light Method,TP391.41
  12. Real-time Detecting and Tracking of Moving Objects Using 3D Lidar,TN957.52
  13. Investigation on Characteristics of Staring Lidar System,TN958.98
  14. Gas Concentration Measurement Based on Laser Absorption Spectroscopy,O433.51
  15. The Modeling and Simulation of Large-scale Water Conservation Construction Equipment Based on Multi-domain Physical Field Theory,TV53
  16. A typical three-dimensional laser-based radar target recognition technology research ground,TP391.41
  17. Research on Key Techniques for Large Transport Vehicle Platform Autonomous Positioning,TH22
  18. Minicomputer contains three-dimensional imaging laser radar system is a key technology research,TN958.98
  19. Design and Implementation on Automatic Calibration System of Automotive PEPS Electromagnetic-field,O441.4
  20. Immersive Virtual Shooting Training System in Human-Computer Interaction Research,TP11
  21. 3mm full-band noise standards precision technology research,TN911.4

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radar > Radar: institutional sub- > Optical positioning radar,laser radar
© 2012 www.DissertationTopic.Net  Mobile