Dissertation > Excellent graduate degree dissertation topics show

Study on Control of Vehicle Semi-active Suspension Based on MR Damper

Author: JiangDongSheng
Tutor: DuanMin
School: Liaoning University of Technology
Course: Vehicle Engineering
Keywords: semi-active suspension MR damper adaptive Fuzzy-PID ADAMS co-simulation
CLC: U463.33
Type: Master's thesis
Year: 2012
Downloads: 110
Quote: 0
Read: Download Dissertation

Abstract


In vitue of the Department of Education key project (2008307)”The mechanics model and design theory research of vehicle suspension system MR damper”, the paper was aimed at improving vehicle running smoothness to carry on research for control strategy of semi-active suspension mainly,and take use of MATLAB and ADAMS to carry on co-simulation.Based on this, the main research contents and results of the paper were as follows:1) Describe the development course of MR semi-active suspension, as well as research situation of its control strategy, at last the author deteimined the main content、purpose and meaning of this article.2) Make an overall introduction to MR effect、the mechanism of MR and the working model of MR, and derived damping force of MR damper based on working model. And in this basis, the anthor built the simulation model of MR damper in MATLAB.3) The road surface roughness and power spectrum of it was introduced, and built C level of random road input model in MATLAB/SIMULINK; the paper analyzed the suspension perfoemance evaluation index, as well as the suspension’s effect on vehicle running smoothness and handling stability, it built 2-DOF 1/4 vehicle semi-active suspension dynamic model and established its state space equation. At last, make use of ADAMS/View to build 2-DOF 1/4 vehicle semi-active suspension mechanical model.4) Research and design of control strategy for semi-active suspension was concentration of this acticle. Based on PID control and fuzzy control, the author carried a depth research on control strategy of MR semi-active suspension with classical control and modern control theory. In orde to improve vehicle running smoothness, the author built PID single control model、Fuzzy-PID composite control model and adaptive Fuzzy-PID composite control model in MATLAB/SIMULINK.5) 2-DOF 1/4 vehicle semi-active suspension mechanical model was imported to MATLAB through ADAMS/Controls interface, so by this way, the author established PID control co-simulation model、Fuzzy-PID control co-simulation model and adaptive Fuzzy-PID co-simulation model of MR semi-active suspension. Conduct co-simulation, the result of co-simulation indicated that the vehicle running smoothness of MR semi-active suspension with three control strategy was significantly better than paasive suspension. Compared with PID single control strategy and Fuzzy-PID composite control strategy, adaptive Fuzzy-PID control strategy showed better control effect which greatly reduced vehicle body acceleration.The research achievement of this paper provided some reference value and guiding role for the design and development of MR semi-active suspension, and the application of co-simuliation provided new ideas for vehicle dynamics simulation.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  3. Design and Control of Intelligent Bionic Leg Base on Hybrid Actuation,TP242
  4. Vibration Isolation Design of Powertrain Mounting System of a Commercial Vehicle,U463.33
  5. Intelligent Substation Experimental Platform for Simulation and Evaluation,TM76
  6. Simulation and Experimental Study on Performance Characteristic of Engine Valve Train,TK403
  7. The Cleaning Performance Simulation and Optimization of Rear Rolling Drum-Type Sweeper,U469.691
  8. The Research of Four-wheel Steering Based on Optimal Control and Co-simulation,U463.4
  9. On Fuzzy PID series motor speed control and parameter visual debugging,TM31;TP391.41
  10. Study of Digital Controlled Bi-directional DC/DC Converter,TM46
  11. Research on Modeling and Co-simulation of Riding Comfort for Semi-active Suspension Vehicle,U463.33
  12. Intelligent semi-active suspension system of stochastic nonlinear dynamics,U463.33
  13. Program Design and Dynamics Analysis of a New Deployable Bridge,U441.3
  14. Research on the Control System of Semi-active Suspension,U270.3
  15. Study on Inversely-Proportional Relief Valve of Lateral Semi-Active Suspension System,U270.33
  16. Research on Electric Loading System of Rudder Based on DSP,V216.8
  17. Research on Control System Based on Virtual Prototype of the Inverted Pendulum,TP13
  18. Research on the Mr Damper Control System and Experiment of Shear-type Mr Damper,TB535.1
  19. The Design of Control System Based on Variable Frequency Hydraulic Station,TM921.51
  20. The Design and Control Research of Automotive Magnetorheological Semi-active Suspension System,U463.33

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Travel System > Suspension
© 2012 www.DissertationTopic.Net  Mobile