Dissertation > Excellent graduate degree dissertation topics show

The Research on Mechanical Properties of CFRP Plate Reinforcing Steel

Author: LiHong
Tutor: LanWenWu
School: Guangxi University
Course: Structural Engineering
Keywords: CFRP reinforcement steel Mechanical properties
CLC: TU391
Type: Master's thesis
Year: 2011
Downloads: 45
Quote: 0
Read: Download Dissertation

Abstract


This paper adopts the theoretical analysis and experimental research method of combining and making the explorative study on mechanical properties of CFRP (Carbon Fiber Reinforced pllymer laminate, shortened form CFRP) plate reinforcing steel beam. Total completeing seven root the mechanical properties and experimental study of CFRP plate reinforcing steel beam, compareing pasteing the different lengths of the CFRP plate reinforceing different injury steel beam with intact steel beam, analyzing the failure mode of the Specimens after reinforcement, the strength (yield load、reaching normal use limit state of load、limiting load), stiffness and ductility of improving the degree and rules, and the Specimens after reinforcement whether still according with flat section assumption is validated and completeing calculating and analyzing the utilization efficiency of CFRP plate. In addition, the possible failure modes and stress state of CFRP plate reinforcing steel beam on the basis of theoretical analysis, deriveing the strength calculation formula in elastic stage and the elastic-plastic stage, compareing the results of theoretical calculation and the experimental. Research shows:(1) CFRP plate reinforcing the injury steel beam can make its carrying capacity, bending stiffness, ductility to obtain the very good recovery, adopting the feasibility of strengthening modes is effectively validated. Usually the length of CFRP is longer, and its carrying capacity is raised, the effect of reinforcement is better; the depth of injury slot have greatly influencing on the strength, stiffness and ductility, Usually the deeper slot depth, the strength, stiffness and ductility weakened by the degree, And this slit width influence are small.(2) Injury steel beam adopt CFRP plate after reinforcement, it accords with flat section assumption in elastic stage, and also basicly accords with in plastic stage.(3) Analysing the strain difference value between the CFRP plate and Next flange steel informed:In calculation and analysis, specimen reaches the yield load and, if do not consider the relative slipping and fillet thickness between the CFRP plate and Next flange steel, approximate think the CFRP plate strain equal to the Next flange steel strain will bring certain error. Computing, should take the necessary measures to eliminate them.(4) Calculation and analysis found that the efficiency of the CFRP plate is only about 20% utilization in yield.(5) the results of deriveing the strength calculation formula are agreement with experimental results shows that the calculation formula has higher precision.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Research on Cooperative Orbit Determination in Satellite Network Based on Multi-Agent System Theory,V474
  5. Environmental Effects of Poisonous and Harmful Substances in the Typical Industrial Solid Wastes,X705
  6. The Loading Behavior Mechanism of Reinforced Concrete Beams Strenghened by CFRP,TU375.1
  7. Stainless Steel Bright Annealing Furnace with Waste Heat Recovery Energy-saving Technology Research,TG155.1
  8. The high fill SSP material PVC - based flexible sound insulation composite materials,TB34
  9. The Research on the Current Situation and Reinforcing Technology of Brick Masonry Structure in Rural Areas,TU746.3
  10. Contrast Experimental Research on Aseismatic Behavior of Masonry Walls Strengthened with Cfrp and Steel-Meshed Cement Mortar,TU746.3
  11. Stainless steel fuel cell bipolar plate and its experimental and simulation,TM911.4
  12. Shape Memory carbon fiber composite material and its performance analysis,TB381
  13. Longitudinal magnesium alloy AZ91 under AC magnetic field properties of welded joints,TG407
  14. Pearlitic heat resistant austenitic stainless steel and carbon steel, dissimilar steel welding Migration Research,TG457.11
  15. Aluminized steel dissimilar metal stud melting brazing technology Test Method,TG454
  16. Porcelain steel surface preparation in the lining layer of Technology,TG174.45
  17. 7200 tons of water pressure on the lower beam of the casting process,TG24
  18. SCH13 steel surface micro - arc deposition and cladding Enhancement Technique,TG174.44
  19. Heat Treatment of Cast Al-Cu-Ti-(La) alloy microstructure and mechanical properties of,TG166.3
  20. Lactic acid -based copolymer / vermiculite ceramic composites and properties of,TB332
  21. Fe 3 O 4 , carbon nanotubes and graphene reinforced regenerated cellulose membrane research,TB383.1

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Steel
© 2012 www.DissertationTopic.Net  Mobile