Dissertation > Excellent graduate degree dissertation topics show

Femtosecond Pulse Laser Preparation for Silicon-based Nanostructures Photovoltaic Material Research

Author: RuanZhaoZuo
Tutor: HeBoYong；ZhuYiMing
School: Shanghai Jiaotong University
Course: Microelectronics and Solid State Electronics
Keywords: Femtosecond laser pulses "black silicon" photovoltaic material micro-nano structure "light trap" effect
CLC: TN249
Type: Master's thesis
Year: 2011
Downloads: 345
Quote: 0
Read: Download Dissertation

Abstract


When the monocrystalline silicon surface irradiated in a certain gas atmosphere by femtosecond pulse laser, the surface area observed by the naked eye appears black, while the microscopic surface displays directed cone shaped peak structure. This material is commonly known as "black silicon". The special material has more than 90% of the spectrum absorption from nearly ultraviolet to mid-infrared. The higher of the height of micro-cones formed on the surface of―black silicon‖, the better the absorption efficiency.We mainly introduced the research on femtosecond pulse laser preparation for silicon-based micro-nano structure photovoltaic material. In the project, we successfully built the experiment system to fabricate the "black silicon" photovoltaic material, used the system successfully to produce "black silicon" photovoltaic material with higher micro-cones, and summarized the experiment procedure and the experimental parameters of manufacturing "black silicon" photovoltaic material.In this paper, we created―black silicon‖photovoltaic material successfully and studied the surface morphology law under various experimental parameters. 1, Studied the relation between the height of micro-cones formed at "black silicon" surface and the number of femtosecond laser pulses under a certain femtosecond pulse laser power, certain SF6 gas pressure; 2, studied the influence of femtosecond pulse laser power volume on the "black silicon" surface morphology, and summarized the curve of the height of micro-cones formed on the "black silicon" surface via laser power volume ; 3, studied the height of micro-cones formed on the "black silicon" surface under different SF6 gas pressure;4, studied under constant femtosecond pulse laser fluence, change the number of femtosecond laser pulses and volume of femtosecond laser power respectively, the variation on the surface of "black silicon". Through the above research, we found that the height of micro-cones is determined by both of femtosecond laser pulse induced plasmas enhanced etching effect and laser melt effect. Both of effects can be enhanced by adding number of the laser pulses. However, laser melt effect can exceed plasmas enhanced etching effect when the number of laser pulses exceeding a threshold. The variation trend of height of micro-cones as a function of the number of laser pulses is almost the same under various pressure of SF6.We set up the micro-cones model by using software simulation approach for―black silicon‖microstructure, and calculated that the surface of―black silicon‖was 20 times larger than that of normal silicon, which greatly increased the incident light absorption area and optical path. According to the "black silicon" surface structure model, we simulated the reflectivity in full spectrum ranges which was close to actual one. Finally, we set solar cells manufacturing solutions based on the―black silicon‖photovoltaic material.

Related Dissertations

  1. Preparation of Superhydrophobic Coating and Study of Application,TQ171.68
  2. Research on Far-field Subwavelength Focusing,O439
  3. Investigations on Optical Properties of the Micro/nano-Structures Mimicking Butterfly Wing Scales,Q811
  4. Research of Ship Bionic Drag-reduction Based on Micro-nano Structure,U674.701
  5. Preparation and Performance of Micro/nano-structured Electrodes for Intermediate/Low Temperature SOFCs,TM911.4
  6. Based on micro-nano structures of subwavelength focusing effect,O436
  7. Molecular Dynamics Simulation and Experimental Research of Solid-liquid Interface Wettibility,O363.2
  8. Investigations on Water Flow and Heat Transfer in the Super-Hydrophobic Micro-Channel,TQ021
  9. Fabrication of Micro-Nano-structural Ni Films and Research of Ultrafast Electron Dynamics,TN304
  10. Micro/Nano-Patterned Structures from Photocurable Polysilazanes,TB383.2
  11. Controllable micro-nano structure LiMn_2O_4 Synthesis and Electrochemical Performance,TM912.9
  12. Practical Preparation Methods for ZnO Micro/Nano-Materials,TB383.1
  13. Photon micro-nano structure preparation, characterization, simulation and applied research,O482.3
  14. A Study on the Forms and Self-cleaning Mechanism of the Scales on Butterfly Wing Surface,Q811
  15. Molecular Alignment and Alignment-ionization in Double-pulse Laser Field,TN241
  16. FePt / CoFe magnetic composite membrane dynamics of laser pump-probe,O484.43
  17. Interaction of Femtosecond Laser Pulses with Transparent Materials and Its Applications,TN241
  18. Theoretical and Technical Research on Fabricating Micro Fiber F-P (Fabry-Perot) Sensor with Femtosecond Laser Pulses,TP212.14
  19. Study of the Technologies of High-density Optical Data Storage with Short-wavelength Laser Source and Solid Immersion Lens,O437
  20. Studies on Theories and Experiment in Femtosecond Laser Micromachining,TN249
  21. Research on Fabrication of Microstructures and Particles Manipulation by Femtosecond Laser,TN249

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser applications
© 2012 www.DissertationTopic.Net  Mobile