Dissertation > Excellent graduate degree dissertation topics show
Numerical Simulation and Application Study of Little-Oil Ignition Technique in Pulverized-Coal Fierd Boiler
Author: ChenLei
Tutor: FanHaoJie
School: Shanghai Jiaotong University
Course: Thermal Power Engineering
Keywords: Pulverized-Coal boiler Tiny-oil ignition Pulverized coal burner Numerical simulation
CLC: TK227.7
Type: Master's thesis
Year: 2011
Downloads: 46
Quote: 1
Read: Download Dissertation
Abstract
|
In May 2005, NDRC launched the "Medium and Long Term Energy Conservation Plan", which proposed that 38 million tons of oil should be conserved and alternated during the "Eleventh Five-Year plan" period and set it to be the first of the top-ten energy-saving projects. Coal-fired boiler unit requires large amounts of fuel oil during the ignition and stable combustion, which is an important part of power plant fuel costs. Relying on Shanghai WuJing second power generation Co.LTD "1 # furnace little-oil ignition transform" project, multilevel conditions for burner and furnace are simulated from the view of main factors affecting pulverized-coal ignition in this article. In the simulation, checking with the classical studies of the previous research was focused on.Finally this paper indicates the engineering application of the little-oil ignition in full scale. And experimental results verified the simulation accuracy. The research indicates that pulverized coal can be ignited successfully under the oil feed rate 80kg/h, 97.3% oil saved comparing to the former technology; the position of coal ignition could be put off with primary-air velocity increasing; Smaller coal particles are better to promote the ignition. Under a certain condition, an optimal coal concentration exists; with those pulverized-coal could be rapidly ignited.The result can be used to supply gist with ameliorating and designing little-oil ignition burner.
|
Related Dissertations
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- Study on Springback of High-Strength Steel Stamping,TG386
- Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
- High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
- The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
- Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
- Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
- Numerical Simulation of Biomass Direct Reburning,TK16
- Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
- Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
- Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
- Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
- Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
- Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
- Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
- The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
- Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
- Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
- Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491
CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam boiler > Run > Ignition,start and shutdown
© 2012 www.DissertationTopic.Net Mobile
|