Dissertation > Excellent graduate degree dissertation topics show
Research on the Three-Dimensional Model Design of Gas Migration in the Gob Coal Face
Author: ZouXu
Tutor: ZhaoYaoJiang
School: Taiyuan University of Technology
Course: Safety Technology and Engineering
Keywords: Simulation test Similarity theory Goaf Gas migration
CLC: TD712
Type: Master's thesis
Year: 2011
Downloads: 112
Quote: 0
Read: Download Dissertation
Abstract
|
Goaf gas emission to account for a large proportion of the gas emission, only to understand and master the occurrence of air flow flow state and goaf gas migration and emission law to identify the gas accumulation only can the targeted adjustment stope ventilation system, determine the parameters of stope reasonable ventilation to prevent the accumulation of gas. However, due to the constraints of the site conditions, it is difficult to observe to adopt the Gas Flow physical process. This thesis from the perspective of the test, to 14205 Shaqu Mine mechanized mining face as the prototype build a simulation study of the stope goaf gas migration test in the laboratory system, based on the similarity theory and similarity criteria for the conduct of mining The goaf Merry flow state and gas migration law. Paper a more detailed analysis of the stope goaf gas emission law and emission; qualitative analysis for the the goaf gas concentration distribution law goaf; same time the use of the cross three districts, \the theory combined Shaqu Mine 14205 Face the specific circumstances, to determine the height of the caving zone and goaf a \The paper was established in order to ensure that a similar relationship between model and prototype, to achieve the purpose of science simulate real underground environment, goaf gas migration should follow similar guidelines in the three-dimensional model based on the similarity theory and similarity criteria, to determine the geometry of the model and the other relevant parameters, model and prototype geometrically similar movement similarity and dynamic similarity. Papers structural design and build three-dimensional models, the main contents include: the design model of the main ventilation systems, simulation test bench stope, fan blower attachment, collection and detection system; spherical valve as a damper in the model, a model more ventilation mode conversion and use; goaf characteristics analysis, based on the completion of the analysis results goaf filling; calculation of local resistance and friction, selected according to the maximum ventilation resistance fan; gas release system design model based on the goaf gas sources and emission law; measured parameter selection detection element; strictly follow the geometric similarity requirements, reasonable experimental material to build a roadway in the laboratory, the test requires face and three-dimensional model of the mined-out area. Finally, using the model of the \
|
Related Dissertations
- Study on Gas Prevention and Control Technology at Fully Mechanized Caving Face of Liujia Coal Mine,TD712
- Model-based safety-related systems research and application of simulation methods,TP391.9
- Industrial valves electro-hydraulic position servo drive system and its application,TH137
- Asian Orbiter ascent Control Method,V448.2
- Based on magnetic grid-type magnetic sets of key technologies proportional solenoid,TM574
- The Simulation Research and Safety Assessment of Operating Coach During Side Impact,U467.14
- Dynamic Characteristic and Hardware-in-loop Simulation Research for Automobile Electric Power Steering System,U463.4
- Research on the Dynamic Characteristics of High Speed Solenoid Valve for ABS,U463.526
- Model Test Research of High Piers and Large-span Continuous Rigid Frame Bridge,U448.23
- Research on Gas Migration Law in Mechanized Mining Face with High Gas,TD712
- The Region Prevention Technology of the Coal Spontaneous Combustion in the Large Goaf,TD752.2
- Reserch on the Influence Caused by the Froth Well’s Exploitation of Wujia Mine on the Working Slope Strata Movement of Pingzhuang West Open Pit,TD325
- Experimental Research on Supporting Performance of Roadway Filling Bodys in Roadway Maintained Along the Goaf,TD353
- Li Wu copper mine goaf processing technology research,TD862.1
- Based on the the VB6.0 goaf risk evaluation model and system applications,TD325
- Study on the Key Technologies of Gob-Side Gate Entry Driving on Deep Working Face,TD353
- The Research on Settlement of Two-dimensional Reinforced Composite Foundation,TU473.1
- The Research of Theoretical Analysis and Experiment on Expansion Reinforcing Strip,TU755
- Security and stability of the diversion tunnel and the underlying goaf,TV221.2
- The Strength Analysis of Motorcycle Frame Based on the Real Load,U483
- Drivetrain System Design and Analysis for Hybrid Electric Commercial Vehicle,U469.7
CLC: > Industrial Technology > Mining Engineering > Mine safety and labor protection > Mine atmosphere > Mine Gas
© 2012 www.DissertationTopic.Net Mobile
|