Dissertation > Excellent graduate degree dissertation topics show

The Research on Sequence Start-up Problem of Heavy Scraper Conveyer

Author: WuFengBiao
Tutor: LiChunYing
School: Taiyuan University of Technology
Course: Mechanical Design and Theory
Keywords: scraper conveyer conveyor line sequence start-up finite element analysis dynamic simulation
CLC: TD528.3
Type: Master's thesis
Year: 2011
Downloads: 142
Quote: 1
Read: Download Dissertation

Abstract


Heavy-duty scraper conveyor often uses head and tail driving. The head and tail usually drive to start at the same time. This inevitably causes the head and tail motor scraper chain of power imbalance and tension increasing. To solve this problem, some units adopted the method of the head and tail motor sequence starting, but there is no frame of reference for the order and time sequence starting. This article focuses on the problems of conveyor sequence starting.First we apply the wave theory in order to research the scraper conveyor dynamics sequence starting. Building the machine’s dynamic continuity equation, and qualitative analysising the scraper conveyor dynamics of sequence starting.In order to facilitate computer simulation and quantitative study the sequence starting of scraper conveyor, this article established the viscoelastic model of a scraper chain and the dynamic finite element model of scraper conveyer by selecting the appropriate drive based on the viscoelastic properties and derived the dynamic equation.Based on the kinetic equation, this article established simulation model in the AMESim platform and started the simulation in different conditions and different ways. This article researched the change of dynamic tension the nose and tail of the chain and sprocket at the meeting point and separation point, compared with the average power calculation of head and tail motor output in the process of starting, and the problem of the balance of the output power of scraper.Through the simulation, this article verified the correctness verification of the program of units by experience. This article provided a theoretical basis for heavy-duty scraper conveyor in the startup problem of the heavy and head and tail sequence starting.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  5. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  6. Design of Testing Equipment for Electronic Products,TN06
  7. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  8. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  9. Sham hose drum drive means and hydraulic system of the structure,TE973
  10. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  11. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  12. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  13. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  14. Prediction and Simulation of Air Quality of Coal Mining Area Based on VGIS System,X831
  15. Centrifugal Flying Shear Dynamic Analysis and Optimization of Drive System,TG333.21
  16. Analysis on Static-dynamic and Fatigue Characteristics of Metallurgical Overhead Traveling Crane,TH215
  17. Research of Deep Excavation Construction Process for Nearby Subway Section Action,TU753
  18. Denatured eccentric - non-circular interpolation Planetary institutional analysis , design and parameter optimization,S223.91
  19. Analysis for the High-pressure Gas System in Guangzhou,TU996
  20. The Design of Telescopic Asphalt Spraying System,U415.524
  21. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2

CLC: > Industrial Technology > Mining Engineering > Mine transport and equipment > Underground transport and equipment > Conveyor transport > Scraper conveyor transport
© 2012 www.DissertationTopic.Net  Mobile