Dissertation > Excellent graduate degree dissertation topics show

Study on Refinement of Grains and Low Temperature Sintering Properties of BaTiO3 Based Semiconductor Ceramic

Author: TuWenFang
Tutor: JiangShengLin
School: Huazhong University of Science and Technology
Course: Materials Physics and Chemistry
Keywords: BaTiO3 PTCR effect hydrothermal synthesis liquid deposition coating Two-step sintering low temperature sintering BaO-B2O3-SiO2-MnCl2-LiF
CLC: TQ174.75
Type: Master's thesis
Year: 2010
Downloads: 39
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of science and technology, the miniaturization, multifunctionalization and chip technology of electronic components have become as the mainstream. As an integral part of electronic components, the chip technology is also imperative. The main problem of preparing multilayer chip components PTCR is the preparation of fine grained ceramics and lower sintering temperature of PTCR ceramic in order to achieve co-firing between ceramic layers and electrodes. This thesis made the preparation of multilayer chip PTCR thermistor element as the ultimate goal, mainly studied on preparation of fine-grained ceramic powders and sintering PTCR ceramics with low temperature.Several kinds of nano BaTiO3 powder were prepared by different methods. The effects of the reaction temperature, time and material match of the hydrothermal synthesis on the properties of nano BaTiO3 were investigated. The particle size of BaTiO3 increased with the reaction temperature and time increased. By optimizing the condition of reactive system, we could prepare pure BaTiO3 powder with particle size of 32nm, and Ba / Ti of 0.9520 in perovskite structure. The sol - gel method could also synthesize BaTiO3 powder with particle size of 100-200 nm.The effect of doping method （liquid deposition coating; conventional ball-milling mixing） on microstructure and electrical properties of nano-grained BaTiO3 ceramics were investigated. The results showed that the liquid deposition coating method produced a homogeneous distribution of the additive in nano-grained BaTiO3 ceramics, and obtained homogeneous microstructures. The samples with 0.3 mol% Y（NO3）3 resulted in low room-temperature resistivity of 37.8Ω·cm, ratio of log （Rmax/Rmin） of 4.8 and temperature coefficient of resistance of 56%/℃. Two-step sintering method was used to control grain growth. The samples sintered at 1250℃for 5 mins resulted in the average grain size of 1-2μm, room-temperature resistivity of 46.8ΩΩcm, and ratio of log （Rmax/Rmin） of 3.5.In order to lowering the sintering temperature of BaTiO3-based PTCR ceramics, the BaO-B2O3-SiO2-MnCl2-LiF sintering aid was proposed to add in. The effects of BaO-B2O3-SiO2-MnCl2-LiF sintering aid on microstructures and PTCR characteristics of BaTiO3 ceramics were investigated. The experiment results indicated that PTCR ceramics with 0.5 mol% LiF could produce enough liquid at sintering process and result in low room-temperature resistivity of 151 cm and a resistivity jump of 5.6х103.

Related Dissertations

  1. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  2. Flexible,rigid,Synthesis and characterization of mixed ligand complexes,O621.1
  3. Syntheses, Structures and Properties of Coordination Polymers with Aromatic Dicarboxylates,O631.1
  4. Syntheses, Structures and Properties of Metal-organic Coordination Polymers Based on Long-Chain Aromaticmulticarboxylate,O631.3
  5. Synthesis, Crystal Structure and Properties Research of Keggin-Type Polyoxometalate Based on Tungstate Anions,O611.4
  6. Study on the Preparation and Photocatalytic Properties of Titanate Nanotube Arrays Composite Meterials,TB383.1
  7. Study on the Hydrothermal Synthesis of Spinel-type Lithium Ion-sieve and Ni-Cr Doping,P579
  8. Preparation of Nano BaTiO3 and TiO2,TB383.1
  9. Synthesis, Characterization and Application of the Novel Coordination Polymer with Pyridinecarboxylic Acid as Ligands,O633.5
  10. Preparation of Rare Earth Compounds Nanomaterials Using DNA as Templates,TB383.1
  11. Synthesis and Characterization of the POMs Based on Strandberg-Type Polyoxometalates Porous Materials,O627
  12. Synthesis and Sensing Property of One Dimensional Metal Oxide Nanocrystal,TB383.1
  13. Synthesis of Water Soluble Superparamagnetic Monodisperse Ferrites Nanostructure,TB383.1
  14. Molecular Dynamics Simulations of the Radiation Effects in BaTiO3 Ferroelectrics,TM221
  15. Studies on the Fabrication and Multiferroic Property of BiFeO3-based Ceramic,TQ174.1
  16. Synthesis, Crystal Structure and Characterization of Transition-metal Complexes Based on Vanadium-substituted Keggin Polyoxotungstophosphates,O641.4
  17. Preparation, Low-Temperature Sintering and Electrical Properties of BNT Microwave Dielectric Ceramics,TQ174.1
  18. Investigation on Hydrothermal-solid Phase Method and Low Temperature Sintering of ZnO-1.1TiO2 Microwave Dielectric Ceramics,TQ174.75
  19. Research on Microwave Dielectic Properties and Low Temperature Sintering of CaO-SrO-Li2O-Sm2O3-TiO2 Ceramics,TQ174.651
  20. Low-temperature sintering ( Zn , Mg ) TiO_3 microwave ceramics research,TQ174.1
  21. Desulfurization of Gasoline by Al-MCM-41 Mesoporous Molecular Sieve,TE626.21

CLC: > Industrial Technology > Chemical Industry > Silicate > Ceramic Industry > Ceramics > Industrial ceramic
© 2012 www.DissertationTopic.Net  Mobile