Dissertation > Excellent graduate degree dissertation topics show

Study on Amorphous Copper-Based Catalysts for Direct Synthesis of Dimethyl Ether by Hydrogenation of Carbon Dioxide

Author: QuFengFeng
Tutor: TianYing
School: Harbin Normal University
Course: Physical and chemical
Keywords: amorphous catalyst copper-based catalyst rare earth oxide dimethyl ether
CLC: TQ223.24
Type: Master's thesis
Year: 2011
Downloads: 35
Quote: 0
Read: Download Dissertation

Abstract


Direct synthesis of dimethyl ether(DME) from carbon dioxide by catalytic hydrogenation is great economical and environmental importance, not only to synthesize the useful chemical products, which will utilize carbon dioxide more efficiently, but also to reduce the greenhouse effect resulting from carbon dioxide.The catalysts of single-step syngas-to-dimethyl ether were studied. By co-precipitation sedimentation preparation dimethyl ether synthetic catalyst part, with the mechanical mixing that mixed the methanol synthesis catalysts with methanol dehydration catalysts in the various ratio, and make catalysts reactivity in the fixed bed reactor.By chemical reduction method and impregnation method were prepared by the amorphous and conventional states of the two forms of the catalyst, and its carbon dioxide conversion and DME selectivity were investigated. The results shows that the amorphous copper based catalyst prepared by chemical reduction catalyst has good activity. When reaction temperature is 513 K, reaction pressure is 3 Mpa,1000 h-1 space velocity,94% conversion of carbon dioxide and dimethyl ether selectivity of 86% were obtained using amorphous catalyst Cu-ZnO-Al2O3/HZSM-5. The NH3-TPD analysis showed that the acidity of amorphous copper based catalyst bacame stronger than that of conventional catalyst prepared by impregnation method. However, the stability of hydrogenation of carbon dioxide using amorphous catalyst Cu-ZnO-Al2O3/HZSM-5 was bad. It is necessary to modify the amorphous catalyst Cu-ZnO-Al2O3/HZSM-5.The amorphous catalyst Cu-ZnO-Al2O3/HZSM-5 was modified by added 2%(mass fraction of catalyst) manganese oxide, zirconium oxide, lanthanum oxide and cerium oxide. The results showed that the modified catalysts show more stable than the unmodified catalyst. XRD analysis showed that the copper dispersion of modified catalyats increased. H2-TPR results showed that the interplay of CuO and supporter become stronger. The stability of amorphous catalyst Cu-ZnO-Al2O3-CeO2/HZSM-5 was investigated by follow reaction conditions:513K,3 Mpa, feed gas mixture carbon dioxide:hydrogen=1:4, reaction space velocity:1000 h-1. The results showed that the carbon dioxide conversion and DME selectivity change to a lesser extent within 20 hours, indicating better stability of the catalyst.

Related Dissertations

  1. Density Functional Theory Study of Dimethyl Ether Adsorption on the Low-Index Pt Surface,O485
  2. Research on Zinc Oxide Varistors Doped with Rare Earth Oxides,TM54
  3. Laser Direct Metal Deposition (DMD) of Ni-Base Superalloy and Its High Temperature Oxidation Resistance,TF124.39
  4. Preparation and Properties Study on Rare Earth Oxide and Sorbitol Derivatives Nucleation Modified Antibacterial PP Film,TQ325.14
  5. Study on Thiophene Hydrodesulfurization Performance of SBA-15 Supported Ni-B Amorphous Alloy Catalyst,O643.36
  6. Research on Preparation and Properties of Hydrodeoxygenation Catalysts,TE624.9
  7. Rare Earth Complexes Synthesis, Characterization and Preparation of doped zinc oxide and Performance,O614.33
  8. Study on Catalytic Desulfurization and Denitrification of Flue Gas over Modified Ti-pillaring Rectorites,X701
  9. Study on Preperation, Characterization and Methodology of Salen-type Metal Complexes and Rare Earth Nanometer Oxide,O641.4
  10. Synthesis and Morphology Evaluating of Low Dimension Rare Earth Compound Materials,O614.33
  11. The Study of Grinding of Polished Ceramic Tile and Diamond Tool,TQ174.7
  12. Influence of La2O3, CeO2 on Preparing the Nanometer Cobalt-based Catalysis Material by the High Energy Ball Mill,TB383
  13. The Preparation of Rare Earth Oxides with Nano Ordered Structure by Sol-Gel Method,TB383
  14. Effect of Lanthanide Oxide Additives on Structure and Electrical Properties of (Na0.5Bi0.5)1-xBaxTiO3 Ceramic with a Composition Near MPB,TB34
  15. Preparation and Characterization of Rare Earth Compounds Nanofibers Via an Electrospinning Technique,TB383.1
  16. Carbide hood accessories,TS43
  17. Optical Properties of Alpha-Sialon Ceramics,TQ174
  18. Effects of Rare Earth Oxides on the Properties and Microstructure of Magnesia Refractory,TQ175
  19. The Research on the High Aluminum Zinc Based Alloy Intensified by Rare Earth Oxide,TG139
  20. Synthesis and Characterization of Rare Earth Composite Oxides Luminescent Nanofibers by Electrospinning Technique,TB383.1
  21. Novel Microfibrous-structured Ni-based Catalyst Composites for H2 Production via NH3 Decomposition,TQ116.2

CLC: > Industrial Technology > Chemical Industry > Basic Organic Chemistry Industry > The production of aliphatic compounds ( acyclic compounds) > Aliphatic alcohols (alcohols, hydroxy compounds) and its derivatives > Alcohol derivatives > Ether
© 2012 www.DissertationTopic.Net  Mobile