Dissertation > Excellent graduate degree dissertation topics show

Research on DSP Control for Power Factor Correction Circuits of Switching Power Supply

Author: SunXing
Tutor: ZhangWeiPing
School: North China University of
Course: Circuits and Systems
Keywords: power factor correction digital control didital compensator error analysis
CLC: TM46
Type: Master's thesis
Year: 2011
Downloads: 175
Quote: 2
Read: Download Dissertation

Abstract


In the power electronic circuits, because of the non-linear of the electronic switch, the circuit’s input current harmonic content is very high, which leads the power factor of power electronic devices is very low, and very serious impact on the grid. In order to limit the current distortion, the International Electrotechnical Commission put forward the corresponding harmonic limits, this standard in 1994 and fully implemented in the EU, also pushed the network side of the PFC development. In the switching power supply circuit, PFC technology is a very important research, researched by the majority of scholars and engineers, the traditional analog technology with the corresponding control IC chip development has become a more mature technology.In recent years, digital signal processing technology with the rapid development of digital signal processing chip, more digital signal IC has been used in the switching power supply.,the advantages of digital control making the digital control PFC became a hotspot research. However, comparing with the analog control technology, the digital control technology still has many problems. This article is based on this starting point, research the digital control PFC of the switching power supply used in the high-pressure gas discharge lamp circuit. In-depth study of the analog control and digital control PFC relevance and diversity, while digital control PFC circuit are given a system improvement, the results is better.In this paper, the works are as follows:(1) The loop of power factor correction circuit design method is discussed, the summary of the voltage loopand current loop design standards are gived.(2) The power factor correction circuit design method of PI compensator is discussed, the PI compensator design problems and solutions is gived. the influenceof voltage loop bandwidth for system performance is discussed.(3) The power factor correction circuit design method of digital compensator is analysised, and the two different methods are compared. the digital compensator in the process of discreting is analysised.(4) Two ways to improve the performance of digital control PFC circuit method has been gived, the ideal experiment experimental results to verify the accuracy of the given method.(5) The digital control PFC system exists in digital signal processing error is analysised,the control loop of PI, PID controller is equivalented to the IIR digital filter and the error through the control loop is calculated,the noise error propagation model in the system for digital control PFC system is discussed.

Related Dissertations

  1. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  2. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  3. The Research of a Novel High Efficiency PFC Circuit Based on One Cycle Control,TM46
  4. Microwave frequency with the LLC resonant soft-switching power,TM925.54
  5. Elementary level of Thai students \,H195
  6. Research on Maintenance Decision Optimiztion and Risk Analysis for Thermal Power Plant’s DCS,TM621.6
  7. The Pronunciation Error Analysis and Teaching Countermeasures to Thai Undergraduates of Chinese,H195
  8. Chinese Idioms Teaching and Learning in Vietnam,H195
  9. Research and Implementation of Automatic Clutch in Hybrid Electronic Vehicle,U463.211
  10. Study on a Reconfigurable Articulated Arm Coordinate Measuring Machine,TH721
  11. Study on 3D Checking System for the Ballastless Track in the High-speed Rail Way and Its Error Analysis,U216.3
  12. Research and Design of the De-weighting Controlling System of the Automatic Dynamic Balancing Machine,TH877
  13. A number of attributive contrast of Chinese and Vietnamese and Vietnamese learners bias analysis,H195
  14. The Research of High Power Factor Correction and Soft Switching Inverter,TM921.51
  15. Research and Application of the Discrete Data Fitting Model,TM743
  16. Study and Design of Digital Controller for DC-DC Converter,TM46
  17. An Error-Analysis on Writing Fossilization for Vocational College Students,H319
  18. Adverb \,H195
  19. Chinese errors in pronunciation of the initial stage of Mongolian students and teaching countermeasures,G623.2
  20. Study on a Tripod Parallel Universal Platform,TG659
  21. Research and Design of the APFC Circuit Based on the CUK Converter,TM46

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile