Dissertation > Excellent graduate degree dissertation topics show

Based on Wavelet Transform Method of Operating Modal Parameter Identification

Author: LianJunYi
Tutor: XiongXiaoYan
School: Taiyuan University of Technology
Course: Mechanical and Electronic Engineering
Keywords: operational modal parameters identification wavelet transformation wavelet ridge Morlet wavelet Time-frequency analysis
CLC: TH165.3
Type: Master's thesis
Year: 2011
Downloads: 148
Quote: 0
Read: Download Dissertation

Abstract


Nowadays, based on modal analysis of vibration more and more scientific research institutions and enterprises of great importance, and modal parameter identification is one of the most important part of the foundation. Owing to the signals by practical testing could more objectively represent the intrinsic properties and boundary conditions of structures, the operational modal parameters identification become the latest research and developing direction in the field of modal parameters identification.Based on the reasons mentioned above, the operational modal parameters identification using wavelet analysis method is presented in this paper, the main content of which could be summarized as following:The accomplishments about operational modal parameters identification, both home and abroad, in the past resent years are systematically summarized here, and thus the research contents which to be later analyzed in this paper are determined.The basic theory of wavelet analysis is summarized systematically in the view of operational modal parameters identification. The property of wavelet time-frequency localization is deduced theoretically, and the relationship between wavelet resolution in time domain and that of frequency is analyzed. On the condition that the basic requirement of parameters identification is met, the Morlet wavelet is chosen as the mother wavelet to be used for system modal parameters identification based on wavelet selection principle after the various properties of several types of wavelets are analyzed and compared.Wavelet ridge extraction method is deeply analyzed in this paper that lays the foundation for exhibiting the method of modal parameters identification using wavelet method. The basic method for extracting wavelet ridge is exhibited on basis of the stationary phase theory. After analysis the differences among the various wavelet ridge extraction methods, the ant colony algorithm is chosen for extracting wavelet ridge. The simulation test turn out that ant colony algorithm not only could extract the wavelet ridge well, but also has a high noise resistance.The wavelet transformation used for identifying operational modal is established in this paper. A simulation example of 3DOFs system is presented which verifies the validity of modal parameters identification method using wavelet transformation of which precision is validated by comparing the results of experiment with that of theoretical calculation.In this paper, the operational vibration of cantilever is simulated by stimulating it using stochastic white noise. The modal parameters is identified by means of Polymax, Wavelet transformation, ITD (the Ibrahim Time Domain Techniques), and ARMA (Auto Regressive Moving Average) time-series modal methods. The modal parameters that identified using wavelet transformation, ITD, and ARMA are compared based on the results of Polymax, which furthermore verifies the validity and reliability of wavelet transformation method.

Related Dissertations

  1. Research of Visibility Improving Method for Underwater Observation Video Images,TP391.41
  2. Band Entropy Method and Its Application to Fault Diagnosis of Rolling Bearings,TH165.3
  3. Study on Filtering Algorithm of the Aerial Gravity Measurement Data Processing,P223
  4. Study on the Theory of Electromagnetic Detection and Development of Virtual Instrument for Steel Rope Broken Wire,TD532
  5. The the HHT analysis and application of mechanical vibration signal,TH113.1
  6. The timing jitter Research HHT - based algorithm,TN914
  7. Research on the Algorithm of Shortwave Communications Signals Modulation Recognition and Its DSP Realization,TN925
  8. The Implementation of Morlet Wavelet Transform Based on Switched Current Technology,TN713
  9. Research on Feature Analysis Methods of Dynamic Signal of Axial-flow Compressor,V263.6
  10. Investigation on the Method of Modal Identification under Operational Condition,TP391.41
  11. Research on the Identification of Radar Signal Modulation in Earth Observation System,TN957.51
  12. Analysis of extreme temperature changes in Shaanxi Province,P467
  13. The Study of Image Segmentation on Graph by Regularized Diffusion,TP391.41
  14. HHT - based fault diagnosis of time-frequency analysis,TN911.6
  15. Low Quality Finger Vein Image Enhancement,TP391.41
  16. The Investigation of Methods of Harmonic Excitation Identification in Operational Modal Analysis,TB533
  17. Study for the Method of Gear Fault Diagnosis in Reducer,TH165.3
  18. Micro-Doppler of Tracked Vehicles and Features Extraction,TN974
  19. Detection and Analysis of Hydrodynamic Noise in Hydro Turbine,TK267
  20. The Research on Ship Imaging Algorithm under the Sea Clutter Background,TN958
  21. Research on Ionosphere Contamination of High Frequency Radar Echoes and Time-Frequency Analysis Technology,TN958.93

CLC: > Industrial Technology > Machinery and Instrument Industry > Machinery Manufacturing Technology > Flexible manufacturing systems and flexible manufacturing cell > Fault diagnosis and maintenance
© 2012 www.DissertationTopic.Net  Mobile