Dissertation > Excellent graduate degree dissertation topics show
Study of A Multi-Channel Stimulating Microelectrode Array for Visual Prosthesis Based on MEMS Technology
Author: LuoXueJiao
Tutor: ChaiXinYu;SuiXiaoHong
School: Shanghai Jiaotong University
Course: Biomedical Engineering
Keywords: visual prostheses MEMS microelectrode array(MEA) suprachoroidal implantation
CLC: R318.1
Type: Master's thesis
Year: 2012
Downloads: 76
Quote: 2
Read: Download Dissertation
Abstract
|
By implanting a neural microelectrode into human body on specific areas, it can treat some diseases which traditional drugs or surgery can’t treat, such as Parkinson disease, epilepsy, paralysis, abnormal muscle tone, the senile dementia, the incontinence, defibrillators abnormal, deaf and blind, etc. Recently, research efforts worldwide are developing implanted visual prostheses aimed at restoring vision for the blind. As one part of the visual prostheses, the implanted microelectrode array (MEA) is the direct interface between the external electronic circuit system and the nerve tissue, it plays an important role in the system of vision restoration. With the rapid development of micro-electro-mechanical systems (MEMS) technology in recent years, research of multichannel stimulating MEA based on MEMS technology draw widespread attention.The main research contents of this thesis include:(1) We designed and fabricated a muti-channel flexible implanted MEA for the suprachoroidal electrical stimulation based on MEMS technology. The MEA was arranged by 6×10 with additional 4 optional return electrodes, and a single electrode was 350μm in diameter. Photosensitive polyimide (PSPI) instead of traditional non-photo sensitive polyimide or parylene was chosen as the substrate and insulating material, platinum (Pt) was served as the conducting material for the electrodes owing to its high charge delivery capacity and chemical inertness in the physiological environment. We developed a double-layer metallization process technology for interconnecting lines which realized the higher density electrodes and reduced the interconnecting-part width in comparison with a single-layer fabrication process. To avoid the cracking problem existing in the platinum-PI structure, a Ti intermediate layer and oxygen plasma were introduced to retard the tendency.(2) The MEA was evaluated in vitro and in vivo. In vitro, an automatic three-electrode test system was used to measure the electrochemical impedance spectroscopy (EIS) of the MEA. The charge storage and injected capacity were respectively identified by cyclic voltammetry (CV) and Voltage Transients. In vivo, EEP waveforms could be consistently recorded by implanting the MEA in rabbit suprachoroidal location and the spatial spread maps of EEP indicated that the stimulating sites were topological to the response areas on the visual cortex. The results indicated that the MEA was suitable for long-term safe suprachoroidal stimulation, and could be considered as a potential visual prosthesis.
|
Related Dissertations
- Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
- Silicon pressure sensor design of analog-digital conversion circuit,TP212.1
- Design, Modeling and Fabrication of Micropump Actuated by Laser-induced Shock Wave,TH38
- Study on Temperature Field and Residual Stress Model Research of MEMS Accelerometer,TH824.4
- Structural Design and Fabrication of Radial Permanent Magnet Vibration Generator,TM313
- Wafer Level Vacuum Packaging of MEMS Device by Solder Sealing,TN305
- SHS reaction bonding process research and application,TN405
- Six -axis micro- accelerometer electrostatic levitation design and system -level simulation,TH824.4
- MEMS-based micro- fluxgate sensor technology research,TP212
- Microchannels cavitation research,TH703
- Theoretic Research on Fiber Accelerometer of MEMS,TP212.14
- The Research and Design of MEMS-Based Earthquake Detector,P631.43
- Microfabrication of Solenoid-Type Microinductor with Magnetic Core by MEMS,TM55
- Study on Simulation and Fabrication of MEMS Solenoid Microinductor with Magnetic Core,TM55
- Research on Piezoelectric Energy Harvester Based on Eutectic Bonding Technology,TM46
- A Study and Design on the MEMS Reconfigurable Antenna,TN822
- Based on MEMS C -band omni-directional antenna beamforming Research,TN822
- Analysis of Velocity and Experiments for Mircofluid Flow Induced by Alte Current Electroosmosis,O361.4
- SINS Design and Data Processing Technology,V249.322
- Design and Analysis of Buckling Micro Actuator,TH703
- MEMS-based acceleration sensor watermelon maturity NDT system design,TP274
CLC: > Medicine, health > Basic Medical > Medical science in general > Biomedical Engineering > Artificial organs and organ
© 2012 www.DissertationTopic.Net Mobile
|