Dissertation > Excellent graduate degree dissertation topics show

The Effect of Pd and Ni Electroless Process on the Electric-Magneto Transport Properties in LCSMO System

Author: WuYouYong
Tutor: XiongCaoShui；XiongYongHong
School: Huazhong University of Science and Technology
Course: Materials Physics and Chemistry
Keywords: Perovskite manganese oxides Intrinsic magnetoresistance Electroless plating Transport properties of electromagnetic Grain boundary effect Low-field magnetoresistance
CLC: O482.5
Type: Master's thesis
Year: 2011
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


Perovskite manganites have been a research focus of material science, condensed matter physics and other fields, since the discovery of the phenomenon of colossal magnetoresistance in these compounds. Although the value of magnetoresistance in such materials are great, but which occurs at very low temperatures, in a very narrow temperature range and in a large magnetic field usually, that limits the practical application of this kind of materials greatly. Therefore, many researchers are committed to change the internal microstructure of these materials with doping, interstitial and other methods , study the electro-magnetic transport and magnetic properties and expect to get a larger magnetoresistance at room in a low applied magnetic field. In this paper, La0.7Ca0.2Sr0.1MnO3 （LCSMO） /Pd composite system and La0.7Ca0.2Sr0.1MnO3 （LCSMO） /Pd/Ni composite system were prepared. The structure, morphologies, the electro-magnetic transport and magnetic properties of the composites were studied and the possible mechanisms of these characters were discussed. The dissertation consists of five chapters:The first chapter mainly introduces some theories of the manganese oxides. The research intention and significance of my thesis were put forward on the basis of the introduction.The second chapter mainly discusses some synthesis methods, including solid state reaction and electroless plating method.The third chapter mainly introduce Pd into the LCSMO matrix with electroless plating method.With the increase of Pd content, the resistivity （ρ） decreases and the metal - semiconductor transition temperature （Tp） increease, but Curie temperature （Tc） remain almost unchanged. AndσS decreases due to the doping of nonmagnetic Pd. The values of IMR are enhanced greatly for all Pd-added samples.For the sample of plating time x = 40min, the maximum MR is as large as 11% and 35% at 305K under 3kOe and 20kOe applied field. We can suggest that Pd segregated at the grain boundaries plays an important role. The existence of Pd can enhance and modify the magnet action of LCSMO grains.The chapter four, the La0.7Ca0.2Sr0.1MnO3/Pd/Ni composite system have been prepared with electroless plating method. Studies show that Ni present in the around of Pd, and which do not effect the crystal institution of LCSMO matrix almostly. With the increase in the amount of Ni-doped,ρof composites decreases, but Tp and Tc is almost unchanged. Since the incorporation of ferromagnetic Ni, the saturation magnetic moment increases. After incorporation of Ni,the MR of all sampers decreased, the reason is the strong magnetic nickel wakend the magnetic disorder at grain boundaries and increased the distance between adjacent LCSMO particles, and weakend the strong association of the adjacent LCSMO grain.The last chapter is the summary of the full test.

Related Dissertations

  1. Microstructure and Property of Nano Ni-P-Al2O3 Electroless Plating Layer Treated by Laser Technology,TG174.4
  2. Study on the Technics Structure and Performance of Compound Processing of Gas Multi-Elements Peneterting and Electroless Plating,TG156.8
  3. Electroless Nickel Plating on Mg-Li Alloy by Two-step Process,TG174.44
  4. Electroless Plating Ni-P(W) and the Coatings with a Chromium-Free Pretreatment on AZ91D Magnesium Alloy,TG174.44
  5. Study on Electroless Plating Ni-Co-P Alloy Protection Deposit of Sintered NdFeB Permanent Magnet Material,TG174.44
  6. The Duplex Treatment of Electroless Ni-P and Low-temperature Gas Multicomponent Thermochemical Treatment and Functional Properties of Composite Layer,TG174.4
  7. Fabrication and Properties of Copper Matrix Composite Reinforced by TiB_b2 with Copper Coating by Elctroless Plating,TG174.441
  8. Research on Electroless Plating and Corrosion Resistance of Ni-Co-P Coating on AZ31 Magnesium Alloy,TG174.4
  9. Thermal Fatigue Behavior of Electroless Co-P Alloy Coating Surface,TG115.57
  10. The Propagation Forms and Mechanisms of Thermal Fatigue Crack in the Electroless Plating Co-P Coating,TG115.5~7
  11. Preparation and Properties of Nb-Ti-Ni Alloys Membranes for Hydrogen Permeation Properties,TG146.15
  12. Study on the Improvement of Performance of Ni-W-P Coatings after Heat Treatment,TG174.44
  13. Study on the Preparation and Brazing Performances of the Ni-Cu-P Electroless Film Deposited on YG8 Cermet,TG174.44
  14. Study on the Technology of Rapid Tooling through the Combination of Electroforming with Arc Spraying,TG174.44
  15. Preparation of "Three Defenses" Coatings on Aluminum Alloy and Mechanism of Coatings,TG174.44
  16. Microstructure and Properties of Ti3SiC2/Carbon Fibre Dispersion-strengthening/Cu-graphite Composites,TB332
  17. Study on Fabrication of Microdevices on Polycarbonate Sheets by UV-patterning in Combination with Silver Activating,TQ320.673
  18. Study on the Preparation and Electrochemical Properties of Ru/CMSs Composites,TB333
  19. Chemical Plating Preparation of Fe/Al Composite Powder and Study on Microstructure of Its Laser Coatings,TG174.4
  20. Study on Preparation Method of Carbon Fiber Reinforced Nickel Matrix Composite,TB332
  21. A Research of Pretreatment of Al Matrix Composites Reinforcement and Technology of Preparing Semi-solid Slurry by Electromagnetic Stirring,TB331

CLC: > Mathematical sciences and chemical > Physics > Solid State Physics > Solid nature of the > Magnetic properties
© 2012 www.DissertationTopic.Net  Mobile