Dissertation > Excellent graduate degree dissertation topics show

Research on Power Control Technology of High Power Laser RF Power Supply

Author: LiaoZuo
Tutor: TangXiaHui
School: Huazhong University of Science and Technology
Course: Optical Engineering
Keywords: Laser RF power supply Pulse Width Modulator PWM amplification Serial communication interface Grid current detection
CLC: TN248.22
Type: Master's thesis
Year: 2011
Downloads: 76
Quote: 0
Read: Download Dissertation

Abstract


The power control of RF power supply is one of the key technologies of high power RF slab CO2 laser. Power control circuit of RF power supply systematic has researched in this thesis, which include Pulse Width Modulator, PWM signal amplifying, grid current detection of high power electronic tube.The circuit can realize the output power adjustment of RF slab CO2 laser and over-current protection on electronic tube grid. The main contents are as follows:（1）The working principle of high power electronic tube RF power supply and its Requirements for power control circuit has been introduce. Pulse Width Modulation circuit has been designed based on processor TMS320F2812. The circuit can generates three kinds of PWM signals which include maintenance mode, continuous mode and pulse mode.（2） The Serial communication interface of RF power modulator has been written. Communication interface between RF power pulse width modulator and PC has been written by VB6.0 development platform and MSComm communication control. Communicating with the modulator via RS-232 through communication interface, the output signal of RF modulator can be controlled when modulator is in the condition of external controlling and PWM parameters can be real-time displayed when modulator is in the condition of internal controlling.（3） The amplifing circuit of RF power pulse width modulation has been designed. According to the requirements of electronic tube grid drive capability, BIMOSFET is used as an amplifier device of the circuit, whose function is to transfer 5V PWM signal from RF Pulse Width Modulator into -200V PWM signal to drive the grid of tube.（4） The RF power detection circuit for gate current has been designed. The logic function of grid current detection circuit of RF power is completed by using EPM7064SL44 chip. Its main function is to detect the current signal of RF power grid and the power-off signal of circuit. When the average value of gate current is greater than 2.5A or the circuit board is power-down, the CPLD chip would produce a high level alarm signal. Timing simulation for this logic circuit is done by using Quartus2 software.The power control circuit of RF power supply realize the output power real-time control of RF slab CO2 Laser and guarantee that the RF power tube can work safely and effectively within the rated range.This research provides a theoretical basis and design guidance for the caprure of high power Laser RF power supply and its modulator technology.

Related Dissertations

  1. Modeling and flexible spacecraft attitude control technology research,V448.2
  2. The Fire Alarm System’s Backstage Correspondence Design with Realizes,TU892
  3. Power Distribution Monitoring System Based on GPRS Data Transmission,TN929.5
  4. PWM digital power modeling,TM46
  5. Design and Realization of Embedded GPS Yacht Terminal Monitoring System,TN967.1
  6. Study on the Current Test Circuit of Magnetic Saturation of Power Inductor,TN86
  7. Research on Prognostic Cell for Astrionic DC/DC Converter Based on PWM Radiation Damage,TM46
  8. Analysis and Design of Radiofrequency Power Supply for High Power CO2 Laser,TN248
  9. Research on Key Characterization Technology of Radiation-proof Ability of DC/DC Converter,TN792
  10. A Decoupled Control Strategy for HVDC Light,TM721.1
  11. The Design of Digital Spectrophotometer,TH744.1
  12. The modem monitor the circuit design and implementation,TN915.05
  13. Development of intermediate frequency generator power inverter based on fuzzy control,TM31
  14. BiCMOS Current Mode Pulse Width Modulator Research and Design,TN761
  15. Intelligent Measurement Based on MCU PIC16F877,TP274.4
  16. Data-acquisition System Based on MCU PIC16F877 (Terminal Section),TP274.2
  17. Development of the Switching Power Charger,TM910.6
  18. Development of the Distance-Controller for Digital Satellite Antenna Balcony,TP872
  19. The Development of 2.5KVA Variable-frequency Power Sources Controller Based on Samll Gasoline Engine Generator,TM571
  20. The Development & Application of the Second Generation ID Card Reader Module,TP391.44

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser > Gas lasers > Molecular gas lasers
© 2012 www.DissertationTopic.Net  Mobile