Dissertation > Excellent graduate degree dissertation topics show

Design of Key Circuit for Laser Particle Size Analyzer Based on DSP and ARM

Author: WangJun
Tutor: LiuChanLao
School: Xi'an University of Technology
Course: Measuring Technology and Instruments
Keywords: Laser-particle analyzer Embedded system DSP ARM
CLC: TP216
Type: Master's thesis
Year: 2011
Downloads: 77
Quote: 0
Read: Download Dissertation

Abstract


Many materials and products take the form of particles in reality, so the size distribution of particles has a great impact on the quality and performance of these products. The Laser Particle Size Analyzer based on Mie algorithm is widely used in the field of particle size measurement. In current time, the laser particle analyzer usually use the data acquisition card to collect the data and transfer the data to the PC for compute and display with PCI bus. It leads to low integration of the circuit system, large volume, high power consumption, high cost of the Laser particle analyze, and data transmission is susceptible to interference. In view of this situation, we use embedded system based on DSP and ARM to design the circuit and test it.The research on the following aspects is completed in this paper:Researched on the theory of the micro-sphere light scattering has completed a single particle and the particle group scattering intensity distribution analysis, established a laser scattering measurements of light scattering particles distribute mathematical model.Secondly, according to the design requirements completed the design on DSP and ARM embedded system and designed the laser granulometer data acquisition circuit, operation circuit,control and display circuit. finished the circuit chip selection, each module circuit design and PCB design.Thirdly, completed the design of the DSP data acquisition circuit driver, ARM interface drivers and other hardware driver debugging design, and did some related experiments.Fourthly, did some experiments on the original particle in the laboratory test platform of the circuit system data acquisition. Through the comparison with the values to verify the feasibility of hardware system.Through the study of this subject, finished the integrated laser granulometer key circuits design attempting, reduced the volume and power consumption equipment, improved the anti-interference ability of particle size analyzer. Used embedded system to improve the instrument automation, and enrich the automatic peripheral interfaces.

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. The Electric Power Steering System,U463.4
  6. Research on Synchronous Motor Excitation Control System,TM341
  7. The AES Algorithm and Its Implementation in DSP,TN918.1
  8. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  9. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  10. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  11. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  12. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  13. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  14. Transplant of Windows CE Operation System Based on ARM9,TP316.7
  15. The Research of Moving Object Tracking System Based on Embeded Image Process Unit,TP391.41
  16. A Study on the Technology of the Infrared Image Matching,TP391.41
  17. Development of Experimental Robot Control System Based on ARM,TP242.6
  18. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  19. Gui Design and Application Oriented to Embedded Ultrasonic Detecting System,TP274.53
  20. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  21. Research on Visual Servo System of Mechanical ARM,TP242.6

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Automatic testing equipment,instruments
© 2012 www.DissertationTopic.Net  Mobile