Dissertation > Excellent graduate degree dissertation topics show

Study on Passive Fiber Optic DC Current Sensor

Author: WangYingYing
Tutor: JiaDanPing
School: Shenyang University of Technology
Course: Detection Technology and Automation
Keywords: Current Sensor Optical Fiber Thin Film Sensing
CLC: TP212.14
Type: Master's thesis
Year: 2011
Downloads: 70
Quote: 2
Read: Download Dissertation

Abstract


HVDC has more advantages than HVAC, so it has become the focus of the development. DC current sensor is the key of HVDC, so the high performance is demanded. With the increasing of voltage network level and the expansion of power system capacity, the traditional transformer shows more and more shortcomings. It can not meet the development demand of automation and digitization, so it is the inevitable trend that the new DC current transformer replaces the traditional one. Active optical current transformer is a new type of current transformer, and its technology is relatively mature, so the feasibility of the program is larger. However, the sensing head must use the electronic or optical components. Therefore, in high voltage side, there will be the isolation problems, and it is difficult to supply the electric power.Based on the above, this paper presents a new design of the DC current sensor-the DC current sensor based on optical fiber thermometry. It is a new project based on the thin film sensing technology. It combines the thin film sensing technology and the temperature measurement technology. It can avoid providing power supply in high voltage side. The new project does not need electronic components, so solve the long-term problems in high voltage side. Optical fiber temperature measurement technology is already mature, and the thin film sensing technology has the advantage of small type and low cost, and it has become a research hotspot in recent years, so the project has the technical advantage.This paper proposes two new designs for the thin film resistor that is the main part of the system. The mathematical model of the thin film resistor is established and the parameter is designed by ANSYS. Achieve the final technical specifications and solve the problems of slow dynamic response speed and low temperature rise. Propose the design that can verify the reasonableness of the experiment. Set up the test circuit and debug it. The experimental data is processed by MATLAB using the integral area ratio method. Verify the theoretical correctness of the design from the experiment. Finally, debug the whole system. The experimental results verify the validity of the theoretical analysis.

Related Dissertations

  1. Reflective Optical Fiber Temperature Sensor Based on Temperature-Dependent Optical Properties of ZnO Film on the Sapphire Prism Surface,TP212.11
  2. A Research on Optical Chaotic Secure Communication System Based on Optisystem,O415.5
  3. The Optical Measurement of Microstructure Optical Fiber’s Cross-section Parameters,TN253
  4. Research on Double Light Path Distributed Optical Fiber Temperature Sensing System Based on Brillouin Scattering,TP212.1
  5. Fiber optic level sensor studies and trials,TP212
  6. PC-based fiber optic monitoring system research and design,TN929.1
  7. Design and Study of Practical Plastic Optical Fiber Connector and Reflective Fiber-Optic Distance Sensors,TN818
  8. Study on Slow Light Via Stimulated Brillouin Scatting in Optical Fiber,O437.2
  9. Study on Mooring Tension Test Technology of Ocean Engineering Model Test,P75
  10. The Spectrometer Design Based on the Line Array CCD and the Fiber Beam,O433.1
  11. Smart Fiber-Reinforced Polymer Anchor with Embedded Optical Fiber Sensors,TD353.6
  12. The Study of Electronic Current Transformer Based on PCB Rogovski Coil,TM452.93
  13. The Analysis of the Optical Fused Coupler’s Fabrication and Spectral Characteristics,TN253
  14. Composite Cavity Fiber Laser and Its Sensing Applications,TP212.14
  15. Optical Field Distribution Investigation of Optical Fiber Based on Vector Finite Element Method,TN253
  16. All-Optical Format Conversion Based on Fiber Nonlinearities,TN929.11
  17. Wired high reliability of information synchronous transmission system,TN929.11
  18. Analysis and Application of EPON in BeiJing Unicom Access Network,TN929.1
  19. Research and Design of Digital Optical Surveillance System Based on FPGA,TN791
  20. Study on Optical Fiber Sensor for Ultrasonic Testing of Metal Surfaces,TP212.14
  21. The PD Detection Methods of High Voltage Cable Joint,TM247

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Physical sensors > Light sensor
© 2012 www.DissertationTopic.Net  Mobile