Dissertation > Excellent graduate degree dissertation topics show

Research on the Pre-processing of Sructure Finite Element Method and Application for the Analysis of the Camera Device

Author: LiuPeng
Tutor: ChouYuanYing
School: Xi'an University of Electronic Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: The Pre-processing of Finite Element Method Model simplification Connection Mesh Camera
CLC: TP391.72
Type: Master's thesis
Year: 2011
Downloads: 36
Quote: 1
Read: Download Dissertation

Abstract


With the development of the finite element method and engineering increasingly complex, the pre-processing of finite element method related to the simulation model has become a key. This paper studies the pre-processing of finite element method in the three key technologies, analysis of the various parts of the finite element simulation results for the role and influence, and their practical application in engineering was studied.Firstly, that from the CAD model to the CAE model is a conversion process, the simplification and the modification of the simulation model are required before a detailed study in the process, made a number of typical examples of the simplified model component and repair methods.Secondly, the paper studies the connection with the various components of the model setup and mesh for the two key technologies, and some practical applications typically encountered in setting methods of the connection and the mesh method are studied. To CAD component model, connection and mesh of the model in the different settings cases, the simulation results will be different.Finally, the camera device model for further study of these three key technologies in the practical application of engineering methods and simulation has been in research, the results of the camera device model in correctly pre-processing method was validated reasonable.

Related Dissertations

  1. The Research of 3D Human Motion Capture Based on Reference Points,TP391.41
  2. Camera Calibration and Position and Pose Detecting on Vision Measurement System of PCB,TP391.41
  3. The Design of the Dual-Camera High-Speed Synchronous Capturing System Based on Gigabit Ethernet,TP274.2
  4. Wireless mesh network authentication protocol ETAM research,TN929.5
  5. Approach for Calibration and Orientation of Digital Camera Based on Linear Features,TP391.41
  6. Connection of the Elective Module and the Compulsory Module in Teaching of the New National Geography Curriculum,G633.55
  7. Research on Key Technologies for Binocular Stereo Vision,TP391.41
  8. Detection、 Tracking and Localization of Multiple Moving Objects Based on Omnidirectional Vision,TP391.41
  9. Mechanic Analysis of Bridge Reinforcement with Mesh and Steel Fiber Reinforced Concrete and Construction Technology,U445.72
  10. Research and Implementation of 3D Reconstruction Algorithm Based on Computer Vision,TP391.41
  11. Research and Implementation on Mac Protocol and Routing Protocol in Wireless Mesh Networks,TN929.5
  12. The Research on Routing Protocols and Related Technology of Wireless Mesh Network Based on QoS,TN929.5
  13. The Research and Implement on Camera Calibration Technology Based on Trifocal Tensor,TP391.41
  14. Study on Self-calibration Method for Non-central Catadioptric Cameras,TP391.41
  15. Single Camera Calibration Method Based on Dual-mirror Imaging,TP391.41
  16. The Design of Node for Meter Reading System Based on Contiki Operation System,TP212.9;TP274
  17. Research on Target Handoff in Multi-Camera,TP391.41
  18. Design of SDI Video Format Conversion System Based on FPGA,TP391.41
  19. Research on Detection System of Moving Object Based on Binocular Vision,TP391.41
  20. Raster-based three-dimensional projection of dental measurement system,TP391.41
  21. Based on Machine Vision Industrial robots crawling technology research,TP242.2

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Machine-assisted technology > Machine -aided design (CAD), aided drawing
© 2012 www.DissertationTopic.Net  Mobile