Dissertation > Excellent graduate degree dissertation topics show

Efficient study design flyback converters based on modulation of the PWM / PSM

Author: SongXiaoZhen
Tutor: ZhangBo
School: University of Electronic Science and Technology
Course: Microelectronics and Solid State Electronics
Keywords: Switching Power Supply Soft-start PWM mode PSM mode BCD process
CLC: TN792
Type: Master's thesis
Year: 2011
Downloads: 110
Quote: 0
Read: Download Dissertation


With the continuous development of the socio-economic , portable products are widely , switching power supply to get faster and faster development . The switching power supply , because of its small size , light weight and high efficiency and widely used in various electronic information equipment . Flyback converter , widely used in high-voltage medium power applications , to promote the rapid development of the challenge of facing the market , switching power supply integration , cost , energy - saving and efficiency have become increasingly demanding . In this paper, AC / DC chip integrated PWM and PSM two modulation mode , select the appropriate modulation mode can be achieved in different load cases , improve the energy conversion efficiency , reduce power consumption . The controller chip pulse width modulator , skip cycle modulator , power switch FET (MOSFET), circuit protection , soft-start circuit , high voltage charging circuit and loop compensation circuitry integrated by high-frequency transformer to the output end of the grid completely isolated , realize the non-frequency transformer isolated switching power monolithic integration . The control chip support for buck , boost, forward and flyback power conversion circuit . The paper first analyzes the basic principles of the flyback converter , PWM, PFM, PSM mode characteristics detailed analysis introduced , and raised the overall architecture of the chip . Then analyze and verify the working principle of the soft-start oscillator , current limit , and error amplifier , the overall circuit simulation , validation PWM / PSM mode switching function and automatic restart function , and standby power consumption analysis . To finalize the layout , using 3μm the BCD technology developed successfully taped , and chip test , the test results in a number of key electrical parameters of the theoretical design comparison analysis, most of the parameters required to verify the reasonableness of chip design . This study flyback converter output DC voltage of 13V , maximum output power of 20W, can be applied to TV, monitors and other portable devices . Its BCD technology , low-pressure modules and pressure modules integrated together , making the chips much smaller

Related Dissertations

  1. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  2. Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
  3. Research on High-power LED Driver Techniques and Control Techniques,TM923.34
  4. Microwave drive power and microwave sintering furnace study,TN015
  5. Belt variable speed drive systems research,TH222
  6. Medium frequency induction heating power supply design,TM924.5
  7. With soft start function without arc contactor research,TM572
  8. One kind of PWM mode DC / DC buck converter Research and Design,TM46
  9. Switching power saving technology,TN86
  10. Wide Temperature MnZn ferrite materials and low-power transformer simulation,TM277
  11. Multifunction electric pulse therapy instrument design and implementation,TH789
  12. Underwater non-contact power transmission device design , testing and research,TM724
  13. Vacuum circuit breaker module power system electromagnetic compatibility and reliability design,TM561.2
  14. Photovoltaic power generation in solar tracking system design,TM615
  15. A highly intelligent LED SMPS Research and Design,TN312.8
  16. Study and Realization on the High Power Factor Switching Power Supply,TN86
  17. The Features of Softstarter and Its Application in the Control System,TM573
  18. Single-chip power management chip design,TN86
  19. Design and implementation of application uCOS-Ⅱ , three-phase AC induction motor soft starter,TM343.2
  20. A Energy-saving Type Switching Power Supply for Wide Range Load and Redundant Control,TN86
  21. Research on High-voltage Asynchronous Motor Soft-starter Based on Variable Reactor,TM343

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Basic electronic circuits > Digital circuits > Digital-analog , digital to analog conversion circuit
© 2012 www.DissertationTopic.Net  Mobile