Dissertation > Excellent graduate degree dissertation topics show

Simulation Research on Dual-pwm Converter Control of Doubly-fed Induction Generator

Author: MeiYiAn
Tutor: ChangLi
School: Huazhong University of Science and Technology
Course: Water Resources and Hydropower Engineering
Keywords: DFIG dual-PMW converter control simulation
CLC: TM46
Type: Master's thesis
Year: 2011
Downloads: 58
Quote: 0
Read: Download Dissertation

Abstract


The dual-PMW converter which used in the Doubly-Fed Induction Generator is consisted of two fully symmetrical PWM converters; these two converters are connected through a DC bus. The output of the generator-side converter, which is the input of the rotor, directly controls the running of the Doubly-Fed Induction Generator. The dual-PMW converter control is the core of the Doubly-Fed Induction Generator running control. In view of this, the paper attempt to do some simulation research of the control of dual-PMW converter, which is used in the Doubly-Fed Induction Generator.Firstly, the characteristics of the dual-PWM converter were analyzed in this paper, and the work principle of the dual-PMW converter was elaborated. Then the paper established the mathematical model from three-phase static coordinate system of the Doubly-Fed Induction Generator.According to the coordinate transformation theory, the paper further established the mathematical model of the Doubly-Fed Induction Generator from the two-phase static coordinate system and the two-phase rotating coordinate system. Based on the mathematical model, after the introduction of the principle of vector control, the paper identified the power grid voltage vector orientation as the method of the control of grid-converter, then established the control model of the grid-side converter, and designed the control diagram of the grid-side converter. Next, the paper established the mathematical model of the Doubly-Fed Induction Generator. Based on the mathematical model, stator flux vector orientation was identified as the control fashion of generator-side converter, then control model was established and control diagram was designed, too.Finally, in use of the MATLAB/LIMULINK simulation software, according to the control diagram, the paper established the simulation model of the dual-PMW converter. In the light of the simulation model, the paper did a series of simulation studies. The simulation results showed that the control targets of the grid-side converter and the generator-side converter wear achieved successfully.

Related Dissertations

  1. K Company’s Improving Planning and Forecasting for the Reasonable Allocation of Inventory,F224
  2. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  3. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  4. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  5. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  6. Study on Springback of High-Strength Steel Stamping,TG386
  7. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  8. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  9. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  10. Model of Cylinder Controlled by On-Off Valve and System of PWM Control,TH138
  11. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  12. Design and Research on Stabilization Loop of Gyro Stabilized Pod Control System,V241.5
  13. Attitude Control of a Three-Axis Stabilized Satellite,V448.22
  14. Realization of Fiber Optic Gyroscope Signal Processing Circuits Based on FPGA,V241.5
  15. Design and Fault Diagnosis of the Coarse Pointing Control System in Satellite Laser Communication,V443.1
  16. Satellite Attitude Control Methods Using Only Magnetorquers,V448.222
  17. Robust Adaptive Control Algorithms Research for the System of Spacecraft Attitude Dynamics,V448.22
  18. Research on the Attitude Controller Design and Control Strategy of High Altitude Platform,V249.1
  19. Parametric Approach of Active Control Technology for Tailless Flying-Wing Aircraft,V249.1
  20. Attitude Control Law Design Based on Blended Lateral Jets and Aerodynamic Control,V249.1
  21. Attitude Determination and Finite Time Control Algorithms for a Satellite,V448.222

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile