Dissertation > Excellent graduate degree dissertation topics show

Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software

Author: LiZuo
Tutor: ZhangGuanWei
School: Tianjin University
Course: Mechanical Manufacturing and Automation
Keywords: Moldflow injection molding weld lines wargape simulation analysis MP4 product
CLC: TQ320.662
Type: Master's thesis
Year: 2011
Downloads: 46
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of modern industry, mold industry has been widelyused and concerned. Injection mold is one of the important components for the plasticmold. In the actual production of the injection molding, defects of the products aredifficult to predict due to the influence of many factors. The problem was solved by therepeated repairing mold，test mold，adjusted the technological conditions and then to putit into production .Nowadays，this method can not satisfy the requirements of the rapidproduction. With advantages of its own, CAE technology has become an effectivemethod to analyze the complex defects in the injection mold design.In this paper, original scheme in the three fields of flow, cool and warpage wassimulated and analyzed using the common mold CAE software- Mold flow. The resultsobtained include the process of the plastics melt how to flow, pack and cool in the cavity.According to the analytic results of the original scheme, defects of the flow andwarpage were predicted. At the same time, the reasons and solutions of the defects onthe weld lines and shrinkage deformations were proposed. On the basis of the aboveanalysis work, firstly, the gate location optimal design by the best gate location moduleis carried on. The sizes and positions of the weld lines were improved. Second, theoptimal processing conditions by the molding window module were proposed. Theshrinkage deformations were decreased a little. Finally, this paper using the packingpressure curve optimizing function to make the deformations decreased the reasonablerange.The research results in this paper are of great significance for the reasonable injectmold scheme. Simultaneously, an achievable way is explored for the FEA of thecomplex inject mold design by using the Mold flow software.

Related Dissertations

  1. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  2. Analysis of the Injection Molding and Mold Design of the Small Car Plastic Parts,TQ320.662
  3. Design and Implementation of the Process Monitoring and Fault Diagnosis for Injection Molding,TQ320.5
  4. Within the connection developed to detect its mechanical properties of zirconia abutment,R783.6
  5. The Research on the Transmission Performance of SCTP Over Multiple Paths,TN915.04
  6. One kind of peer to peer network file sharing algorithm simulation and performance analysis and comparison,TP393.09
  7. Research on Surface Quality Improvement of Microcellular Foam Injection Molding Parts,TQ320.662
  8. Research and Experiment of Partial Mould Thermal Field Analysis Based on Induction Heating,TQ320.66
  9. Based on product quality control of injection molding process,TQ320.662
  10. Neural Network Based on Particle Swarm Optimization color injection molding process,TQ320.662
  11. Automated welding boiler membrane wall design and research,TG409
  12. FOG inclinometer thermal simulation analysis and optimization,V241.5
  13. Concrete pumping system hydraulic shock and stroke deviation Optimization,TU646
  14. TBM cutterhead system synchronization driven research,TM921.48
  15. Research on Vibration Fatigue of Stiffened Aluminum Alloy Panel,O346.1
  16. WCu electrical contact products injection molding process and performance studies,TF124.3
  17. Based on the response surface method injection molding process optimization and quality prediction,TQ320.662
  18. Thermal Performance Modeling of Power Plant Boiler System and the Application of Optimization of Coal Blending,TK227
  19. The Research of the Air ABS on Semi-trailer Combination Vehicles,U463.526
  20. Analysis of Transmission Error and Vibration with Modified Spiral Bevel Gear,TH132.41

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Production process and production technology > Forming > Injection molding
© 2012 www.DissertationTopic.Net  Mobile